How to clean a Maytag dishwasher filter. If you enjoy a clean and quiet dishwashing cycle every time you run the Maytag dishwasher in your home, then this is not likely an issue that you face.
Over time, however, it may begin to appear as though something has gone wrong with the appliance itself or that its ability to properly clean your dishes may be starting to fail.
In many cases, the fault lies not with the machine but rather with a clog in the filter.
Fortunately, when this happens, it is typically quite easy to fix all that needs to be done is drain off some water from the inside of the washer before manually removing any clogs.
How to clean a Maytag dishwasher filter
How to clean a Maytag dishwasher filter. Maytag dishwashers are renowned for the high cleanliness of their finished dishes.
If your dishes, glasses, and silverware don’t seem to be getting as clean as they once were, it may or may not be an indication that you need a professional Maytag dishwasher service.
However, it is more likely that you just need to clean out the filter on your dishwasher because some residue buildup might be weighing it down.
Incidentally, cleaning out the filter on your Maytag dishwasher happens to be a fairly uncomplicated affair.
The Best Way to Clean the Filter
To clean your Maytag filter, you should first unlatch your dishwasher and open the door. Then, pull the bottom rack completely out of the dishwasher so you can access it.
Once you have done that, look for a tight-fitting grate covering a hole in the bottom of your dishwasher. Look at this grate carefully when removing it from the machine.
Also, make sure to take a look at whatever is left behind once you remove this grate from the unit. If there’s some food (or something else) in there, remove it and pitch it into the trash.
Once all of the grime is drained from this area (and out of the dishwasher) wipe it down with soapy water to ensure all of the food particles are gone before putting it back into place inside your appliance.
Next, find a filter somewhere in your unit and remove it! You will also see an opening right underneath where this filter sat that looks like a vent or something similar – wash this area with soap and warm water as well!
Installing a new filter
Before you replace the dishwasher filter, try using some lemon juice to shine it up. Doing so can help make the filter appear newer and sparkly all over again.
Next, replace the reservoir in its compartment and replace the bottom rack of your dishwasher.
Then, reload everything and turn it on again to check out your dishes – if they need a bit more cleaning, toss in an extra run cycle with vinegar or even some of those detergent packs that clean with citrus scents.
The lower spray arms on a dishwasher are usually particularly prone to soap buildup and hard water deposits, so keeping them cleaned off can save you time dry-running different cycles.
If you’re maintaining your dishwasher regularly with vinegar or lemon juice and occasionally clean those lower spray arms during an empty run cycle or two alongside these products’ use, you’ll keep your Maytag appliance nice and fresh.
How do I clean the filter in my Maytag dishwasher?
To remove most food particles and residue from your filter, place it under a warm running tap for a few minutes.
If this doesn’t do the trick, use a sponge or old toothbrush to scrub gently at any gunk until clean.
Do most dishwashers have a filter that needs to be cleaned?
Some filters are self-cleaning. Others, like those used in newer dishwashers, need to be cleaned manually.
If your dishwasher begins to smell funky or if your dishes come out feeling gritty or have bits of food stuck on them, it’s time to clean the filters inside your machine.
Related Guides
