Hotpoint oven broiler not working. When it comes to kitchen appliances, Hotpoint is one of the most trusted brands.
From fridges and washers to dishwashers and microwaves, Hotpoint understands that each situation calls for different types of machines.
That’s why they manufacture a range of models shaped by their customers’ needs or lifestyles. In addition to having a wide range of products to choose from,
Hotpoint implements a strategy after-sales service ensuring that all their appliances are easy to use, reliable, and durable.
We have listed below ready to assist with your Hotpoint oven broiler not working requirements at any given moment.
Hotpoint oven broiler not working
When cooking Hotpoint ovens broiler stops working, inspect the broil element for holes or blisters. To determine if the broil element has burned out, use a multimeter to test the element for continuity. If the broil element does not have continuity, replace it.
We will discuss some reasons and their solution in this article about the Hotpoint oven broiler not working.
Broil Element has burned out
The broiler may be broken. If the element does not glow red when it’s supposed to, this indicates that it is either bad or not receiving power.
Oftentimes, if an element is not working properly it will be visible damage from a hole or blister and/or burnt looking spots on where the sticker should be covering.
Inspect with a multimeter if you see signs or your element isn’t working properly. To determine if the broiler is getting power replaced if necessary with an identical model.
Replace Igniter
The igniter, which glows to ignite the burner assembly, is inspected for indications of normal operation as the oven heats up.
The clearance between the igniter and its matching opening within the main gas valve should be 0.08 in.
While heating and observing their action, a weak or missing glow indicates that these devices are not functioning properly and need to be replaced.
Defective Temperature Control Thermostat
The temperature control thermostat is used to regulate the heat of an oven. When your thermostat gets defective, you must replace it as soon as possible.
Or else you have to get someone who works in this domain to help you diagnose the problem carefully during service.
Bake or Broil Spark Electrode issue
For broiler burners to ignite and stay ignited, a heat-sensing device called a pilot light must be present. The pilot light is located at the bottom of the burner and senses when there’s not enough oxygen for combustion.
When it does, it ignites up to a mixture of natural and propane gases, thus relighting itself to keep the flames burning strong. As mentioned above.
if the flame goes out following ignition there may be something wrong with the pilot light. This can occur due to low voltage at the range or broken wiring or coil issues.
Faulty Oven Control Board
The oven control board has a number of switches that send voltage to the bake and broil circuits, according to the user settings and sensor input.
If the control board is malfunctioning, it may not be sending power to either one of these components. However, this is seldom the case.
So before replacing the board itself, first test all heating components. Since testing the rebuilt circuit board is difficult, you will need to replace it if there’s a problem.
The safety valve does not have continuity
The safety valve works with the oven igniter to provide gas to the burner. If the safety valve fails, the oven won’t heat. It is very uncommon for a safety valve to fail.
Before replacing the safety valve, first test all of the more commonly defective oven components, particularly the igniter.
If all of the other heating components are working properly, use a multimeter to test that the safety valve has continuity. If it does not have continuity, replace it.
Relay Board Fault
Some ovens are equipped with a relay board. The relay board has several relays which control the electricity to the heating element in the broiler section of the oven.
If one or more of the relays on the relay board fails, that means that there is no electricity flowing and therefore, will not heat up.
Before replacing the relay board, first, check all of your oven’s electrical components in case you forgot to turn them on since accidentally turning off an electrical component can cause an entire relay line to fail (a big coincidence but it does happen).
Once you’ve checked everything out and everything is properly turned on, if none of your heating elements are defective, then it might be time for a new relay assembly.
Wire Connection problem
One of the wires that supply the broil element or broil burner igniter might be burnt out. These wires commonly burn out near the heating element.
To determine whether a wire’s burnt out, you should inspect the wires leading to the element or igniter. If a wire is burnt out and you can still see it drop down inside of your oven, remove it and replace it with another one.
If a wire’s burnt, often you’ll notice discoloration along its length, but on occasion when the burn-out happens near an electric source like a heating element, nearby metal can help conceal the discoloration causing further confusion as to whether anything needs to be replaced at all.
Related Guides