Hoover Vacuum Cleaner Brush Not Spinning

Hoover Vacuum Cleaner Brush Not Spinning. One of the most frustrating and annoying things that can happen is when your Hoover Vacuum Cleaner roller brush won’t spin. So you’ve got dirt and debris on your carpet instead.

If the roller brush isn’t spinning, there are two possible causes: either the roller’s got a problem or it needs cleaning.

You can actually save money by doing it yourself if you do your homework first to find out which one it is. If it’s dirty, clean it and if it’s broken, replace it.

Hoover Vacuum Cleaner Brush Not Spinning

A Hoover vacuum cleaner works by creating a low-pressure zone that sucks up dirt into the surface sweeper brush, which then leaves through a separate channel in the back of the vacuum.

The brush rotation is powered by a belt, but if it snaps you’ll need to replace the belt or turn on your vacuum cleaner.

If your vacuum motor brushes won’t spin, there could be an issue with either the motor, bearings, or wires.

Here are some steps that you can try to unplug the power first and then check those three things.

Overload Issue With Motors

overload issue with motors

If your roller is not working, it may be a good idea to have your motor checked out. The roller motor may be running hot if it keeps tripping and having it looked at can save you a lot of time in the future.

If there are any hanging wires that might be getting in the way of your power supply from reaching the motor smoothly, make sure to remove them so that there aren’t any avoidable obstructions hampering its operation.

Dirty Roller Issue

When the vacuum cleaner has dirt and another buildup inside it, there is too much friction over the roller because of the dirt to the belt and it doesn’t spin.

Unplug your vacuum cleaner and find a place to keep where there are no objects that could potentially damage your hose.

Carpet Layers Are Lazy

If your carpet is loose, it could potentially become a problem. The Hoover vacuum sucks it up, locks the roller, and the belt spins until it burns through.

Tighten your carpet and if the problem continues, check the belt or call in a professional to fix the vacuum.

A Worn Or Stretched Belt

a worn or stretched belt

Vacuum belts eventually stretch out over time, which means they lose their elasticity and cannot easily spin around the agitator inside your vacuum.

The restriction on the belt causes it to slip, or stop spinning completely. To replace your belt, consult your manual for detailed instructions. We know that it can be complicated to repair these things but that’s what you have manuals for.

Defective Brushroll

If the brush roll is stuck and doesn’t rotate as freely as it should, there are likely bits of hair, string or lint stuck to the bearings inside.

Remove the brush roll and clean out all of this material, including anything else you may see in there to free up the bearings from any obstruction.

If thoroughly cleaning out your brush roll doesn’t cause it to spin freely again after putting it back into place on your vacuum cleaner, chances are you will either need a new one or perhaps an entirely new vacuum cleaner altogether.

Faulty Cogged Belt

It is important to inspect the belt to see if it has been damaged in any way. It is advisable to replace a damaged cogged belt as soon as possible with a new one if it is found that the cogged belt has been damaged.

Related Guide

Leave a Comment