Goldstar microwave Troubleshooting. A kitchen would not be complete without an oven today. And there are a plethora of brands in the market including Goldstar microwave ovens which are particularly famous for their high-end designs and smooth functionality.
There are however some issues that may bug you while using this product like the microwave, not heating (or heating intermittently), microwave display not working, etc. But we’ve got quick solutions for these problems.
Goldstar microwave Troubleshooting
Goldstar Microwave Troubleshooting, Our expert team has troubleshooting solutions for these problems, many of which don’t require a visit from a technician, which is always helpful, especially if they would charge you anyway.
Goldstar Microwave isn’t working
If a microwave’s line fuse blows, the microwave won’t start.
Use a multimeter to confirm that the line fuse is functioning properly. If there is no continuity, the fuse needs to be replaced.
If the new fuse blew, then you must figure out what caused it to blow. Replace any other parts that might have caused your microwave to stop making microwaves begin with. If you’ve checked everything out and nothing else appears to be wrong, replace the line fuse with a new one.
The thermal fuse can then be checked once you have done that. If it’s blown, it needs to be replaced.
Goldstar Microwave display does not work
If the display screen doesn’t work at all, then it is likely to be related to the control board or the display board. If only certain things are not working in the display, then typically it is either the control board or the display board that is at fault.
Goldstar Microwave buttons don’t work
Try pressing the buttons on the control panel to determine if the touchpad and control panel are defective. If there are some buttons that do not respond correctly, replace the touchpad.
If there are both some buttons that do not respond correctly and others that are unresponsive, replace both the touchpad and control panel.
Goldstar Microwave seems to be sparking or arcing
The paint on the interior of the microwave might be chipped or damaged. If the paint is chipped, the interior metal might be exposed despite what it’s being covered in, which could possibly cause an electrical spark when microwaves are used.
Check to see if there are any spots where the paint has chipped away or peeling off and touch up with microwave oven paint.
Also, check to see if the waveguide cover (the shiny funnel looking thing) might be damaged or burnt because that too would present a hazard to use when microwaves are going into it.
If it does appear to be damaged whether partially or completely, try removing the waveguide cover and see if the problem resolves itself or not. If the waveguide cover is damaged beyond repair or doesn’t appear fit for duty then you should replace it immediately.
Goldstar Microwave makes a lot of noise
You can test the fan motor by manually turning it after removing it from the microwave. The motor must be able to rotate freely.
If it does spin smoothly, check for incoming power to both the motor and the temperature sensor with a multimeter. If there is voltage to either of them but they do not work properly, replace them.
Goldstar Microwave exhaust fan doesn’t work
Try spinning the fan motor by hand to determine if the motor is defective. Replace the fan motor if it does not spin freely.
If it spins freely but doesn’t work when you turn it on, test the motor with a multimeter to confirm that current is flowing to and from the coil.
If the current is flowing but nothing happens, replace the fan motor. After replacing either piece of this device, be sure to verify that everything works before putting your device back together again.
Goldstar Microwave door will not open
Use door hook to engage with latch. The door hook may break over time, but it’s important to know that it can be replaced. It is possible for the door not to close fully on its own for several reasons.
Make sure that the door’s parts are working properly by inspecting them all. It is advisable to replace any damaged parts, including the latch, the spring, and even the door hook if necessary.
Related Guides
