GE window air conditioner troubleshooting. Your GE window air conditioner has stopped working? This guide offers helpful GE window air conditioner troubleshooting. If it isn’t cooling, first you’ll want to check the airflow.
Next look at the cooling temperature (a thermostat will help with this) – are you trying to change the temperature of a room that’s already cool enough? Or is your thermostat set high or low compared to other areas of your house so that some rooms don’t get as cool as they should be?
Next, you’ll want to make sure that your filter is clean, as well as a lookout for common problems such as power supply issues, circuit breaker overloads, or even restricted airflow.
Most of these issues can be resolved just by switching off or resetting the controls and possibly replacing elements like filters; there is no need for complex home-repair services.
GE window air conditioner troubleshooting
Here we will discuss some common issues and solutions for GE window air conditioner troubleshooting.
Cooling Failure
To avoid serious damage to your air conditioner, be sure you take good care of your air filter.
Not only will this improve the quality of the temperature and cooling you’re getting, but doing so will lengthen the life of your equipment and save you some money in the long run.
Compressor issues are the most common cause of AC failures. There may not be anything wrong with your equipment but there’s definitely something wrong with the way it is being managed.
For example, if an overload protector had been installed and turned off a compressor capacitor then you would have been spared a trip to the repair shop.
If the faulty component happens to be the compressor, find out if it’s worth replacing or if your best option may be to buy a brand-new system from Allcoolers Inc.
AC Not Turning Off
Condenser coils work as the air conditioner’s air filters. They are responsible for removing dirt and debris from the air blown out of your unit in order to prevent anything from clogging it up or damaging the appliance.
If you don’t clean your coils regularly, they will become clogged by debris which will cause ice to build up on them and make them less effective at keeping the internal parts of your unit free from any unnecessary buildup.
This problem could be due to a faulty thermostat. The thermostat can be tested with a multimeter to make sure it functions properly. Set the air conditioner setting to cooling, then use a continuity tester on a three-pronged heating thermostat, or ir across the contact points on temperature controls that rotate from one position to another.
Some thermostats will also have a latch (or similar contact point ) that opens and closes depending on the position of the thermostat.
Defective AC fan
The dual-shaft fan motor might be defective. This type of fan has two sides, each with a wheel that pulls in air and either blows it out or allows it to pass into the interior portion of the evaporative system where it absorbs moisture.
If either wheel can’t turn freely or is loose, it must be replaced because the fans won’t be able to do their job of directing airflow.
Try to rotate the blade manually. If the blade does not turn freely, this could indicate that something is wrong with the motor itself and a replacement should be arranged for. If the blade does turn freely on the other hand, test for power to the fan by plugging in a lamp or other appliance and see if it turns or not.
AC Not Turning Off
The condenser coils are responsible for removing heat from the air. The heat is pulled away from the system by a series of cooling coils on the outside of your unit. Air that runs through this series of cooling coils (the condenser) reaches its final temperature before being pushed into your living space.
If these condenser coils become dirty or clogged, the ability to remove heat is diminished and your air conditioner will have to work harder to keep the room cool.
This continuous strain would cause the system to fail over time because it will be unable to keep up with cooling demand.
The thermostat is the brain of the system, monitoring the temperature and then responding accordingly. If your AC is not turning off it might be the defective thermostat.
If the room grew too warm and the button was pressed, it would power up the motor and compressor to cool things down.
The fan on its own does nothing but circulate air through the system to help everything flow more smoothly, which is why it is called a “defrost” cycle when it turns itself off periodically (in most cases).
Problem With Compressor
If the system fan does not run when your air conditioner’s compressor runs, it may be due to a bad fan motor or control board. However, it could also be a faulty capacitor or an overload you can diagnose by itself.
The temperature control thermostat has electrical contacts inside that will eventually burn out over time. When this happens, the thermostat may still turn on the fan but not the compressor.
The overload protects the compressor from burning out if it draws too much current. If the power cable is faulty an overload can burn out prematurely.
To determine if the overload is usable one can use a multimeter to only test the continuity of the overload or to replace a malfunctioning one.
Noisy Operation of AC
Fan Blades are the culprit for noisy operations. Air conditioners have a fan blade in the front, but they also have a blade in the rear. Check both of the blades for damage. If there is any, replace it with another one from the back of your own air conditioning unit.
When the compressor becomes noisier than usual, it does not at all mean that you must replace your old one. This issue often happens with compressors but almost doesn’t happen at all once the problem has been fixed.
Related Guides
