GE washer won t drain

GE washer won t drain. When your GE washer isn’t draining, there could be multiple reasons behind this malfunction.

From the problem with its drain to the water level sensor on your washing machine, there are several factors involved in this process.

It is up to you as an owner of a GE washer and dryer combo to find out what is going on.

To avoid a basement flood from happening related to this problem, you might want to consider taking some preventative measures such as ensuring that your clothes are clean and dry before putting them into the machine.

It may also help to periodically clean the lint filter and washing machine hose through rigorous vacuuming so that there aren’t any leftovers clogging up the drainage system.

GE washer won t drain

ge washer won t drain

If the washer is not draining and you have a coin trap, remove the coin trap and clean it out carefully. First, check the drain hose to determine if it’s kinked, twisted, or bent. If the drain hose is bent, straighten it out. Also, remove it from the washer and check for obstructions in the pipe itself.

In this post, we’ll go over all of the possible causes for your GE washing machine won’t draining and you’ll have the information and know-how to fix these problems yourself.

Sudsing excessively

This is not an error on your part, though you might feel it is. This is simply the result of using too much detergent there isn’t enough water to wash it away from your clothes and into the drain.

To permanently fix this problem, add one cup of white vinegar or two cups of RID-X or CLR to the drum next time you do laundry, then run a cycle with hot water.

This should eliminate any residue that’s affecting the drain, so future washes will go smoothly.

Defective Drain Pump

Sometimes, small objects like sand, rice, or toys can get washed down the drain and clog the drain pump. To check if that’s what’s causing it to be noisy.

You will want to remove the pump and inspect it for any obstructions (toys, sand or rice are common culprits). If the pump is clear of obstruction, but still noisy during its spin cycle then you will want to replace it.

A door strike has been broken

Inspect the door strike assembly for damage. If the door strike is broken, replace it. The door strike is not repairable and must be replaced.

Drain Hose problem

drain hose problem

First and foremost, check the drain hose to make sure there are no kinks or twists in it. If you find that the drain hose is damaged, immediately replace it.

Once you inspect the drain hose and realize everything is okay, look at the garbage disposal if you see food particles jammed inside of it then clean them out by hand.

Once you’ve removed all particles from inside of the disposal and you’re still experiencing problems draining water out of your sink, consult your manual for further instructions.

Faulty Water Pump Belt

Drain pumps are commonly found in most washers. However, some older models may have a particularly weak belt that wears out quickly or has a high chance of breaking.

Make sure you inspect the drain pump belt for excessive signs of wear and tear. Replace it if there is serious damage or wear.

The pump or the hose is clogged

When the time comes, don’t procrastinate. When it’s time to wash them, launder those things and clean them properly. Make sure they’re not causing any damage to other parts of your project.

If you have a problem with small socks getting stuck in other places like the drain pump, consider placing some bleach or another type of biological cleaner in the bucket when putting those items in there.

A problem with the door lock motor and switch assembly

The washer door lock secures the washer door shut during operation. In order for the washer to start, the washer door must shut completely. If this isn’t happening, then there is probably an issue and it will need to be fixed before putting your clothes in it.

Inspect your door lock to make sure that it isn’t broken or damaged. If it is, you will need to replace it with a new one.

To determine if your washer door lock has failed or not, you need to consult your wiring diagram and use a multimeter to check all of them for continuity. If none of them have continuity, then you need new ones.

The lid switch assembly is faulty

The lid switch assembly is an important component of a washing machine that stops the washer from spinning when the lid is open.

When this part fails it can lead to other issues such as not draining properly or even worse, functioning improperly and damaging clothing.

In order to determine if this part is defective and needs replacement, test each of the switches with a multimeter to see if they have continuity (meaning there is resistance between the two points). If any one switch isn’t functioning you will need to replace it.

Coin traps should be checked

If the washer won’t drain or is not draining properly, and the washer does not have a coin trap, remove any debris that may be blocking the drain hose.

Be sure to check and clean out any filter screens. If the washer continues to not drain, check for kinked or pinched hoses in the machine. Check all drain hose connections at both ends (main and machine) to make sure they are tight.

GE washer won t drain

Related Guides

Leave a Comment