GE washer machine wont spin. This is a common washing machine problem that occurs especially on GE machines that won’t spin.
Sometimes machines don’t turn but are otherwise operating depending on whether or not you’re running a wash cycle but the fact remains that it isn’t turning which can be annoying for most people.
As a first step, make sure all of the connections are tight. This can cause a problem if anything is loose at all or corroded because you might have this problem.
If any metal parts do not align perfectly when they meet each other either scrape pieces off the clothes and into your laundry detergent, or strip out any screws and leave them to rattle in the drum during your cycles causing more damage as time goes on.
GE washer machine wont spin
A common issue people encounter with their GE washing machine is that it won’t spin.
This can cause many a headache when we’re in a hurry, but there are very easy ways to resolve the issue – here are some of the most important.
If the motor coupling is broken
The motor coupling is the mechanical device that physically connects the washing machine’s transmission and the motor of your washer.
This coupling is designed to protect the internal components from damage if it’s overworked or overloaded, and it also often has a mechanism for breaking when something goes wrong, like wearing out.
Inspect the motor couplings on your equipment after noticing there are issues with them, but keep in mind that some of these parts simply wear out over time as they are subject to more than just normal use every day.
Defective Lid Switch Assembly
Your washer won’t spin if the lid switch assembly fails. Check the lid switch for continuity using a multimeter to determine if it is defective. If the lid switch does not have continuity, it needs to be replaced
Drive Belt issue
Inspect the drive belt on your washer. Look for any broken or frayed spots on the belt or areas where it appears to be slipping off of the wheel pulleys.
Once you’ve determined that your belt is in good condition, reattach it by first retracting it over the drum and around each wheel pulley, then securing it with a hex key bolt at the top of each wheel pulley.
Faulty Motor Control Board
The motor is powered by the motor control board. It makes sure that the motor you have in your washing machine is working as efficiently and effectively as possible.
Things like a clogged drain, need for freshwater or a dirty filter can damage clothing so it’s key to make sure your washer is in optimal running condition.
If the motor controlling board cannot maintain this quality level of performance then this may
cause you some concerns which may include resulting from shoddy clothing performance resulting in inferior laundry performance for those using the appliance.
If you want to ensure optimal wash results this can be achieved through regular maintenance checks and cleaning of vital components to ensure smooth operations of your wash cycles otherwise a trip to local engineers may be required.
Problem with Door Latch
The door latch is a mechanism fitted on the interior of the washing machine door which secures the door shut to prevent it from being opened during operation.
If the washer is not properly secured, the washer will attempt to reboot when it detects that it’s not getting any power.
To determine if your faulty washer door latch has failed mechanically, inspect the latch for damage and make sure that it fully latches when you close and reopen the washer.
If there are no signs of physical damage to your faulty washing machine door latch, then you may need to run an electrical continuity test to find out if something under-the-hood has gone wrong instead.
By making use of a multimeter, you can quickly check whether or not your faulty repair issue has anything to do with your washing machine door switch.
The Clutch is worn out
It helps facilitate a smooth transition between the transmission and the inner tub by attaching between them.
If the clutch is worn out, it will slow down the speed of rotation in the inner tub. If the clutch wears out, it cannot be repaired – it must be replaced.
Replace the Drive Pulley
The drive pulley is part of a washer that helps the mechanism work. The outer circle of the washer drives a belt that then transfers energy to the inner layer, which in turn assists the final layer which rotates.
The pulley can become worn out, which may result in more friction between itself and the belt than there should be.
If this happens, the belt will not stay attached to the drive pulley as desired, which means it can easily come loose and detach from both of them either temporarily or permanently.
When you notice this has happened, remove both pieces and inspect for damage like cracks, etc.
In case you find such problems, you need to replace them immediately with a new set of belts before you can use your machine again.
Basket drive faults
The basket drive spins the inner tub of transmission and engages with its outer tub. If your transmission is engaging to spin but the outer tub is not spinning or spinning slowly, the drive tabs on the basket drive may be stripped.
Alternatively, if the drive block on the basket drive is stripped or damaged, it will likely not engage at all with your unit’s inner tub. Inspect both these parts for damage and wear.
If neither party appears to be worn out, your clutch pads are likely worn out and you will need to replace them for proper functionality.
Related Guides