Ge Oven Not Heating

Ge Oven Not Heating. If you have a gas oven that will not heat up, there is a good chance that the bake ignitor needs to be replaced.

If you turn on your oven and hear it click off and on several times before the gas ignites in the oven, your bake ignitor may need replacement.

Since clickable functions must be manually operated by pressing them down to activate and release gases, having it become misaligned or otherwise damaged can lead to an inability to use the burners.

While greatly increasing your chances of hazardous gas leakage which can create an environment where explosions are more likely to occur.

Ge Oven Not Heating

ge oven not heating

If you’re baking something and realize the oven’s not working properly, maybe the igniter needs cleaning or replacing. If you turn on the gas to the bake igniter and it’s not clicking before igniting inside your oven, shut off the oven immediately because there’s a risk of spreading natural gas.

In this post, we discuss some problems with the Ge oven when it doesn’t heat up.

Thermal Fuse Problem

If the oven gets too hot, it trips a thermal fuse, which cuts off power to the oven. If the thermal fuse is tripped or blown in this way, the oven will not heat.

However, this is not a common occurrence. To determine if the thermal fuse is at fault, use a multimeter to check for continuity.

If there is no continuity with the thermal fuse (the multimeter registers no electrical flow when checking a closed circuit), replace it the thermal fuse cannot be reset, and if it has blown you need to replace it.

Cause Of Broil Element

Inspect the broil element for damage. If you see a hole or blister, it’s time to change the element.

The broil element glows red when heating properly, so check that the light bulb is continuous or glowing without interruption.

Your broiler does have a sensor that knows when to stop heating, but if your light goes out this could mean one of two things either it’s out of gas or there has been some kind of damage to the heating cable causing interruption in continuity and ultimately an end to cooking functionality.

Baking Element Issue

When the bake element is glowing red, this is a sign that it’s heating properly. If the bake element does not glow red, this could indicate that there’s an issue with the bake element or that it has stopped functioning altogether.

Use a multimeter to test for continuity if you suspect it has burned out. If a bake element does not have continuity and appears visibly damaged replace it.

Inspecting your oven’s wiring before testing can help you to locate the source of the problem, too.

Thermostat With Temperature Control

If the oven broiler system is not working correctly, it can be a sign of a faulty oven thermostat.

The purpose of the thermostat is to regulate the temperature of your oven broiler by shutting off and turning on your broiler again when it gets too hot or cools down.

An easy way to test this part would be to replace it with another one if it’s easily accessible as most ovens have a secondary built-in thermostat inside as a backup in case the primary one fails.

Or you could also try replacing all electrical components from the circuit board to make sure that there aren’t any other problems.

Defective Safety Valve

defective safety valve

The gas oven safety valve works by monitoring the amount of gas being supplied to the burner.

If the safety valve isn’t working properly it prevents the oven from heating. However, this is rarely why a safety valve fails.

Before diagnosing any further run some checks on other potentially defective components like the igniter and elements.

If all of the other heating components are working properly the cause has to be a lack of continuity in the safety valve by using a multimeter test. If there’s no continuity in the safety valve remove and replace it with a new one.

Faulty Relay Board

Ovens that are not heating up may be down to a faulty relay board. The relay board is best described as a circuit board that is used to control the electrical power that comes from the main supply and directs it towards your oven’s heating element or elements.

If there has been a failure within one of the relays on this circuit board, one’s oven will not receive any of this power and therefore it can’t heat up properly.

Thankfully, if this is the case, one simply needs to replace their relay board to restore full functionality to their oven.

Ge Oven Not Heating

Related Guides

Leave a Comment