GE ice maker overflowing water. If the ice maker on your GE refrigerator is overflowing with water, you’ll want to check the water pressure in your building.
If it’s at least 20 psi, and your ice maker is still overflowing, your water inlet valve is likely defective.
You should replace it if this is the case. Another reason for an overflowing ice-maker could be a faulty auger motor so if either of these solutions fails to fix the problem you can try swapping out this part too if need be.
GE ice maker overflowing water
GE refrigerators can overflow your ice trays creating an emergency situation. Once the water drains out of your fridge, you risk a greater problem that could ruin your family’s food and make an enormous mess.
If your GE refrigerator ice maker water overflows, this article provides a solution to the problem.
Defective Water Inlet Valve
The inlet valve needs 20 psi to properly shut off. If the water pressure is too low, it may not close all the way once the power is turned off. This means that it will leak water into the ice maker and cause it to overflow.
First, check to make sure there’s at least 20 psi of water pressure. If there is, then the inlet valve is likely defective and should be replaced.
If there isn’t enough pressure, but yet the ice maker is still overflowing, install a separate water line using a booster pump to ensure proper pressure levels are maintained around 30 psi before going into your house.
So you can use your refrigerator without causing damage because if something like this happens then you’ll need to replace the ice maker and maybe even appliances inside your main box due to expensive water bills as long as you run this type of system.
Faulty Ice Maker Assembly
Assembling an ice maker is a complex process and can be cumbersome to manage. More than likely you will need to replace the entire ice maker if some of its components are defective even if the other parts appear to be working fine otherwise.
Low Water Pressure
The water inlet valve is responsible for two major tasks: it supplies water to the refrigerator ice and water dispenser and also provides the required pressure needed by its working mechanism.
If this mechanism isn’t installed correctly then things could go wrong, such as water flowing into the dispenser housing through an open or leaking valve.
Therefore it is imperative to check that there is sufficient pressure of at least 20psi when testing to make sure the device has been installed correctly!
The Fill tube needs to be checked
Look all the way to the back of the freezer and you’ll find a tube stuck in the wall. Look at its placement within the area, ensuring that it is aligned properly for optimal performance. Check your user manual for more information about this specific concern.
Conclusion
Maintaining the ice maker regularly, as well as the refrigerator helps prevent the problem. That said it’s important to check items including, the water supply hoses and connections on a regular basis to ensure that there are no restrictions or cracks which could mean that your unit will be at a higher risk of flooding.
However, if you’ve checked your hoses etc. and none of the other steps have worked, your unit may require service by an expert. If so in this instance contact GE Cares so they can report details and arrange for service technicians to take care of this issue. Important.
make sure you know when to unplug the refrigerator from power too or else it could result in an electrical shock which as you can imagine could be very dangerous.
Related Guides