GE dishwasher lights blinking. If you’ve ever found yourself in the situation of not knowing what to do and having no idea how to troubleshoot a problem with your GE dishwasher, this article is for you.
If your dishwasher’s lights begin flashing for one reason or another, read on for the most common causes and possible solutions. The most common things that cause flashing lights include the door being left open, the latch on the door is broken or the dishwasher simply in need of resetting altogether.
If any light is blinking other than an all-over flashing light, there’s probably an issue with that specific stage of your dishwashing cycle so make sure you check out those panels as well while diagnosing what might be causing the flashing light display across all lights.
While this article provides helpful insights into understanding how to troubleshoot problems associated with GE dishwashers, it doesn’t replace a technician who can properly diagnose and repair issues relating to these machines.
GE dishwasher lights blinking
If your GE dishwasher won’t start, there could be a simple fix or it could indicate that the appliance needs to be repaired. Using the flashing lights as a guide, figure out if you can quickly get started again or if you need to call in professional help.
Most of these lights flash in patterns that are designed to tell you what has gone wrong and provide information about how to fix it but some do not.
Faulty Heating Element
When the water reaches a certain temperature it activates the electronic device that runs this machine. If your coffee maker does not reach its optimum heating temperature, then it may flash a LED on its control panel.
One way of knowing if this issue is due to the heating element not functioning as intended is using a multimeter to test for continuity.
If you find an issue with your heating element’s functionality and you determine that it is indeed faulty, please know that there are replacement elements sold in stores targeted to dishwasher repair parts.
Fault code check
If the dishwasher isn’t working, check the power supply. Run a visual inspection of the wiring to determine if it is damaged or loose.
Check whether the problem is with the dishwasher itself by reading its manual and following any troubleshooting tips therein. If there isn’t an error code on display, try pressing buttons with and without dishes in them to check whether they’re stuck.
Defective Touchpad and Control Panel
Before attempting to replace the display panel or touchpad, check that the display is working correctly. Confirm that it is displaying an image, that it has power, and that there is a signal on the video cable.
Attempt to adjust the display settings by pressing function keys and internal hardware buttons.
Next, try unplugging the monitor from its power source for one minute and plugging it back in (sometimes a loose connection will become tight over time).
If you set the delay start option on your garage door and then somebody comes in and unlatches it, the lights may continuously flash. Latching the door should turn off any flashing lights.
This issue should correct itself whenever you close the door and latch it properly.
The sink’s drain hose features an impeller that forces water through the pipe. If the pump is not working, a flashing light on the stove surface will let you know.
To determine if a part is defective, use your meter to check for continuity in the pump’s motor. If it does not have continuity, replace it with a new one.
If you dishwasher fire ignition repair phoenix cannot find a replacement, you cannot do this yourself because parts are usually made of rubber or plastic and they can melt inside the device.
So call your friendly plumber and let him help you perform to re-install a new motor.
For some dishwasher models, the mere presence of a flashlight indicates that there is a part of the system such as a thermistor or touchpad short-circuiting. More troubleshooting will be needed as you could even need aboard.
And if you suspect it may just be an inexpensive piece, like a door latch, you can try to narrow down on the defective part by entering the diagnostic mode on your appliance.