Frigidaire Refrigerator Ice Dispenser Not Working

Frigidaire Refrigerator Ice Dispenser Not Working. A Frigidaire Refrigerator Ice Dispenser is a great investment for any household.

You no longer have to go out of your way to constantly refill ice trays or start making ice batches ahead of time just to ensure you’ll have enough for your next barbecue.

A well-functioning ice maker should be able to produce at least one batch of ice each day without fail, even in the middle of summer.

Although it’s quite rare if you notice that your Frigidaire Refrigerator Ice Dispenser is having trouble dispensing or making ice, here are a few troubleshooting tips for dealing with the problem and preventing it from reoccurring.

Frigidaire Refrigerator Ice Dispenser Not Working

frigidaire refrigerator ice dispenser not working

If you have ice, but it feels like there’s a layer of little rocks in it, the most likely culprit is that your refrigerator was not used for an extended period of time, whether this is due to infrequent use, temperature fluctuations, or power outages.

When you restart the frozen food compartment, things tend to get a little melty and then refreeze over and over again on top of the same area leading to scum build-up, which can feel like gravel when you scoop it into your glass.

To fix this issue, simply remove the ice bin entirely, thaw it out, and empty the contents. Next, wipe/dry the ice bin, then replace it in its proper position.

Failure Of A Door Switch

failure of a door switch

A refrigerator door switch serves to lock the dispenser by preventing leaks when the fridge door opens.

Therefore, when the doors are closed, anyone should be able to use the dispenser without any threat of spillage.

However, if you find out that the dispenser refuses to work not only when you open up a compartment with your fridge but also close it again, there’s a possibility that the door switch has failed and requires replacement.

If you test this switch with a multimeter and see that it lacks contact potential (continuity), replace it immediately in order for your reliable refrigerator door to function properly once more.

Auger for Ice Buckets

As mentioned before, when the dispenser lever is pressed, it will activate an electromagnetic contactor.

This will then kick on a motorized ice auger that pushes the cube through the machine and out of the dispenser.

When you press the lever, make sure that you can hear a consistent humming sound from this auger as it moves cubes down the chute into your glasses.

If there’s no movement from the auger when you push down on the lever or if you hear strange rattling noises coming from its many parts.

Then chances are there’s some sort of malfunction with your equipment, and you need to call your repairman immediately before more harm is done to your machine.

Solenoids For Dispensers

The ice dispenser solenoid has the responsibility of opening the door flap to release the ice.

If the solenoid is not operating correctly, it will impact the way that you are able to access your ice, but this doesn’t mean it’s something you will have a hard time fixing.

In short, to determine whether or not the solenoid itself is faulty, you want to make sure that there’s continuity within its mechanism.

This can be done by using a multimeter and checking off specific points on the device as directed by an expert.

In addition, make sure the gears inside the machine mesh correctly; if they don’t, then this will affect the amount of work each cog does to get the cubes from the tray into the glass.

Auger Motor Problem

The auger motor is what spins the auger blade, which pushes ice cubes through the dispenser. If the auger motor isn’t operating or working adequately, then it’ll be a lot harder for you to use the ice maker properly.

To determine if your auger motor has malfunctioned, simply pull out the ice bucket and move it entirely back and forth by hand.

If everything seems to be in order there, then you should use a multimeter to test your auger’s electrical continuity.

If it does not have an electric current flowing or if it isn’t getting enough power, then you know that this means that you need to replace your existing compressor unit in accordance with the manufacturer’s protocols.

Malfunctioning Dispenser Switch

malfunctioning dispenser switch

If a dispenser doesn’t work, you should first check to see if it is plugged in.

Next, use a multimeter to test the circuit for continuity. If there is no continuity, the problem might be a defective switch.

If there appears to be continuity in the switch, you can use a circuit tester to determine if the switches are powered on and going through the right circuits.

Control Board For Dispensers

The dispenser control board functions very much like the brain of any human being. It governs all the other important parts that make up your body, such as your heart and lungs.

If there’s ever a problem with the control board, it can affect pretty much everything from head to toe. But that does not mean you have to test every single organ in your body.

If only one part out of over a dozen isn’t working, it could just be indicating that something is wrong with that specific body part rather than the entire system itself being interrupted by some kind of glitch or error.

Frigidaire Refrigerator Ice Dispenser Not Working

Related Guide