Frigidaire glass top stove burner not working

Frigidaire glass top stove burner not working. These are our helpful tips for some common stovetop problems.

This can make a world of difference when you’re in the midst of preparing your favorite meal and the burners just refuse to ignite.

Likewise, have you all tried making pancakes yourself instead of buying them from a store? Well, that huge difference is exactly what we’re talking about.

It’s like comparing apples to oranges. In this article, we will discuss some common causes and solutions for one of your most important kitchen equipment.

Frigidaire glass top stove burner not working

frigidaire glass top stove burner not working

Problems with stove burners can be frustrating. You’re likely to have encountered a few common problems.

Here are some tips for these common issues and their solutions which will come in handy the next time you have trouble.

Defective Surface Element Board

On gas ranges, the surface element board relays switch the power supply that allows the operation of each burner.

In the instance that one or more relays fail, an individual burner will not function.

This may be a sign that the surface element board is faulty. If two or more burners are not working simultaneously,

you can test continuity on the specific elements to see if they’re broken or not functioning because it might mean that there is a malfunction with their associated relay switch inside the surface element board.

Faulty Coil Surface Element

First, be sure that the element is firmly inserted into its socket. Second, inspect the element and look for signs of damage.

If you notice any, install a new one immediately. Lastly, test the element using a multimeter to ensure it’s in working order and doesn’t have any damaged electrical connections.

Replace Surface Element Switch

On some stoves, the element for the surface heating is separate from the back-burner elements. The surface element is typically used for boiling water and is not intended to be on very long at a time.

The surface element switch sends voltage to this coil. When it gets hot, the switch cuts off power.

If you turn on the stove and nothing happens, or if turning on an element makes a clicking sound but nothing else happens, you probably have a defective switch.

To test further, check for power at the terminals inside where wires connect. There probably isn’t power there either, so you’ll need a new switch.

Solid Surface Element won’t work

The solid surface element of the stove may be burned out if the surface element won’t work.

The surface elements work very similarly to other types of heating systems inside there is a glowing heating system that transfers heat to the thermostat when electricity is applied to it.

Radiant Surface Element issue

If a radiant element is not working, then the heating element is most likely burned out, much akin to a light bulb, and needs to be replaced.

This type of heating system does not have any sort of backup or protection for such burnouts other than replacing the original heating element.

Element Receptacle and Wire Kit problems

The surface area component plugs into a receptacle. In time, the contacts within the receptacle can become damaged. If the receptacle becomes damaged, then the surface component will not receive power.

In order to determine whether or not the receptacle has been compromised, inspect the interior contacts. If those contacts are visibly burnt or damaged, replace that element receptacle.

Also, look over the element prongs for signs of burning, and don’t hesitate to replace both components if any damage is noted because it’s better safe than sorry.

Incoming Power issue

It is possible that the range isn’t receiving the right amount of power. Electric ranges require 220 volts of alternating current flowing through them to work at optimal efficiency.

If your range is not getting the necessary voltage, you may experience trouble with the element not working properly.

To figure out if there’s enough power coming into your wall socket to handle your device, use a multimeter and refer to our troubleshooting guide concerning faulty connections.

Burned or loose wire connections

These wires commonly burn out near the heating element. To determine if a wire has burned out, inspect the wires leading to the element. If a wire is burnt out, it will often be visibly burnt.

Related Guides

Leave a Comment