Frigidaire freezer troubleshooting

Frigidaire freezer troubleshooting. One of the busiest appliances in the kitchen is the freezer. Each day, the hulking appliance sits in its nook, doing a lot. Even when operating normally, the upright freezer from Frigidaire makes a lot of noise.

However, with some simple troubleshooting tips, you can get your freezer back to working order if it is no longer performing as well as it once did.

Frigidaire freezer troubleshootingfrigidaire freezer troubleshooting 2022

Home refrigerators like the Frigidaire brand are one of the most dependable sources for maintaining a fresh and healthy food supply.

This particular make is more efficient than many others on the market but it does still have its share of problems that might doom one’s food if left unaddressed.

It can also be a major reason that anyone would lose money in terms of spoiled foods or expensive repairs, which is why our team has compiled this list of common Frigidaire refrigerator problems with tips to help you troubleshoot the problem and get your food storage back up to temperature before too long.

Frigidaire Freezer isn’t freezing

If the condenser coils are located outside of the walls, you can clean them by simply wiping them with a damp cloth. If the condenser coils can be seen when the freezer door is open, you have to keep in mind that they should be cleaned regularly.

The coils are what dissipate heat throughout the appliance, which allows it to run smoothly, so they need to be clean in order for this product to function properly.

Condenser coils may also contain dust and grime so ensure that when you do decide to clean them you do it often and avoid leaving too much debris on top of them because this can negatively affect their cooling capabilities.

The freezer defrost drain is frozen

There are sometimes little drain straps inside the freezer compartment to prevent any potential frost buildup anywhere in the freezer. Since this handy piece of plastic is so essential to your household.

We suggest you take a chance and check out the freezer from time to time. You may also want to call the service if you see water or ice accumulating around your freezer doorway.

An indicator light has gone out

The indicator light may have burned out. First, check for broken wires or detached connections to the indicator light. Then, check the user control and display board, as this is usually where the burnout is happening.

However, this is rarely the case if the indicator light works but not when the machine is on by itself.

It’s likely that the machine’s user control and display board has been damaged from water damage (which can happen because of household plumbing issues), so, in this case, we would need to replace said machine completely.

Freezer coils frozen

To ensure that your freezer’s evaporator coils remain thawed, the defrost heater will turn on several times throughout the day to melt away any frost that may have accumulated.

If the defrost heater does not come on when it should, frost will continue to build up on the evaporator coils, and eventually, they’ll be completely iced over. This can prevent air from flowing through.

To determine if the defrost heater is turning on, use a multimeter to test it for continuity. If there is no continuity present at the terminals of the defrost heater, then you need to replace it.

A frigidaire freezer keeps running

If a fan motor is not working it should be replaced. Fans are a crucial component of the condenser, which is located at the back of a refrigerator’s exterior. Air passes through the condenser and over the condenser coils.

If there is an obstruction in the blades or they do not spin freely, replace them. Now you can test to see whether the fan motor has continuity by using a multimeter.

You need to determine whether that it does, replace it. The evaporator fan collects and circulates air throughout your freezer compartment.

The most common cause of failure for this particular part is when something obstructs airflow over its coils – like ice buildup for example.

It’s also important to check whether there are any obvious signs of damage such as cracks or broken wires as either problem would render your evaporator fan motor useless.

Freezer not working, clicking noise

When the freezer does not cool, a problem with the start relay can be the cause. If you suspect the start relay is defective, remove it and test for continuity.

To test if the start relay is burnt, smell if there is an odor that resembles burnt plastic. If any of these things are true, replace the broken part immediately and see if this corrects the faulty cooling problem.

If testing suggests that the compressor may be at fault regardless of whether or not you have replaced the faulty parts, clean dust around and/or underneath it to improve cooling efficiency.

Additionally, make sure to regularly maintain your appliance by cleaning out any dust bunnies.

Related Guides