Estate Refrigerator Not Cooling

Estate Refrigerator Not Cooling. When your refrigerator doesn’t stay cold, you need to address the problem as soon as possible to keep your radishes from going bad.

There are numerous reasons why refrigerators may not be cooling, but we hope that this list helps you understand where things might need fixing.

The most important thing when dealing with a cooling issue is figuring out what the problem actually is before trying to address it.

This is why we have put together this extensive list of some of the most common causes of my fridge isn’t working.

Estate Refrigerator Not Coolingrefrigerator not cooling

Here we discuss how to fix Estate Refrigerator problems when it stops cooling.

Issue With Compressor

The compressor is a pump that circulates refrigerant and compresses it in the refrigerator so that it works well.

If the compressor of your refrigerator is not working, then your refrigerator will not be cold.

This is rarely the problem, however. Before replacing the compressor, first, check if all of the other components are working properly.

Check to make sure that all other controls are operating well; if so, you should replace the compressor. You should have a licensed technician install any new parts because some parts of this type may require professional installation.

Problem With Thermistorproblem with thermistor

The refrigerator temperature is monitored by a thermistor that transmits that information to the thermostat.

If you suspect that either of these devices has a problem, you can use a multimeter to test continuity or resistance.

The thermistor will show changes in both characteristics as the refrigerator changes its own temperature.

This indicates that one or both parts should be replaced if one of them does not change when it is supposed to, or if there is no continuity or resistance, respectively.

Control Board For Temperature

The temperature control board supplies power to the other parts of the cooling system. If it’s not working properly, it will let voltage out of the rest of the machine or stop sending power altogether.

However, this is a rare occurrence and usually happens when someone accidentally blows a fuse in the board.

Before replacing suspect your other components, try testing them all with a multimeter. If none are malfunctioning, replace your temperature control board instead.

Defective Start Capacitor

In order for a compressor to begin running, it needs a boost from start-up capacitors. Your fridge won’t be able to cool if the start capacitor doesn’t work, meaning the compressor won’t start.

Faulty Start Relayfaulty start relay

The start capacitor works in conjunction with the start winding to begin running the compressor.

If the start capacitor is defective, the compressor may sometimes fail to run or may not run at all.

As a result, the refrigerator will not be cold enough. To determine if the start capacitor is defective, use a multimeter to test it for leakage current between its terminals. If there’s no leakage from it, replace it with a new one.

Dirty Door Gaskets

Over time, the seal on your refrigerator door can become dirty from food or fingerprints and prevent it from sealing properly. Use a sponge to wipe down the gaskets with warm soapy water.

Wipe down the sections of the door where the gaskets touch, then let dry completely before closing.

Fan Motor For Condenser

Refrigerators use a condenser fan motor to draw air through the condenser coils over the compressor. The refrigerator will not cool properly if the fan motor isn’t working properly.

The blades may be obstructed; if so, remove them to determine if the fan motor is defective. Check if the blades are loose or jammed by manually turning them.

Make sure you choose one that is a perfect match or needs replacing if they cannot spin freely.

Defective Main Control Board

This may be due to a defective main control board. This is, however, rarely the only contributing factor to the problem.

Check all of the most commonly defective parts before replacing the main control board.

Related Guides