Electrolux Refrigerator Ice Maker Not Working. Your ice maker is one of the most helpful features of the fridge. While your Electrolux Refrigerator is essential to keep your entire home’s supply of perishable foods fresh until they are eaten.
But when it comes to day-to-day convenience, that ice maker is an important part of most of our lives.
If you use your Electrolux Refrigerator ice maker every day or even weekly, it’s easy to become reliant on the convenient ice and deliciously cold water.
If Electrolux Refrigerator parts break or malfunction or maybe just stop working properly and cause extra unwanted stress for you as a homeowner.
That’s why it’s a good idea to maintain and repair appliances rather than let them get dusty and out of commission at the bottom of some cupboard.
Electrolux Refrigerator Ice Maker Not Working
The ice maker switch may be defective and should be replaced, or it may have been turned off accidentally. Make sure that the ice maker is turned on by locating and turning on the icemaker switch. If both are working, but the ice maker still isn’t producing ice, test continuity on the switch with a multimeter.
In this article, we discuss some issues with the Electrolux Refrigerator Ice Maker when it is not working.
Icemaker Isn’t Leveled
A mistake many people make is that they do not realize the importance of keeping their appliances leveled properly. If your freezer is not sitting flat on the floor for example, then your ice cube maker may not be lined up correctly.
Believe it or not but you should verify whether your refrigerator’s floor and freezer level are in fact balanced from front to back. If this is off-kilter, then try to fix or replace parts as necessary.
Even if this has been done correctly, ensure that the installation of the icemaker (and any accessories) itself is correct tight screws and a level mounting bracket can make all the difference. Don’t let these two mistakes frustrate you – take care of them right away.
Door Switch Problem
The water dispenser in your refrigerator is controlled by a door switch. If the door switch is defective, you may notice that the water dispensing mechanism will not operate properly.
To troubleshoot this issue it is necessary to measure continuity to verify that.
The switch itself is operating properly while closed and detecting an open position when activated. If the door switch fails these tests, then it needs to be replaced.
Cause Of A Water Filter
Old water filters can clog over time which could prevent your fridge from producing ice.
It’s important to replace the old one with a brand new one every 6 months or so to make sure that your fridge is working properly.
Failed Water Inlet Valve
The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. It has a sensing port that enables the valve to sense when to open or close.
If the water inlet valve doesn’t have power, or if it’s defective, it will not allow water to flow through it. Therefore, the ice maker won’t make ice.
The pressure of the water supply should be at least 20 psi so as to open and close properly with the sensing port; otherwise.
It will not send power to turn on and off for your ice maker as needed. So be sure to check your existing pressure first before replacing parts.
Defective Icemaker Module
Ice maker is packed with many components that must work together to deliver the ice you want. A component called the motor constantly moves a process known as ejection.
This causes an arrand carrying ice cubes through your machine to drop off the ice in the bucket when it gets full.
Your icemaker is equipped with a thermostat that senses temperature changes, or sensors present at the tray level which have been programmed to sound an alert if there’s no ice within reach when you need it.
You surely don’t want your appliance breaking down during a party! So we suggest getting in touch with a professional.
Thermostat For Icemakers
The thermostat is a mold used for making ice. The thermostat turns on the water and waits for it to get too cold before turning them back off.
If you have a broken thermostat you need to replace it because your ice maker won’t make any more ice until the temperature gets cold enough again in the mold.
You can test whether or not there’s continuity inside a thermostat with a multimeter.
Which is an instrument used to measure electrical resistance much like how the thermometer monitors temperatures, only with electricity instead of heat.
Assembly Of Ice Makers
One component in the ice maker assembly might be broken. However, like other components that are responsible for certain functions, the entire assembly cannot be replaced individually which means that you’ll have to purchase and install a new assembly as it is.
Make sure to check the water valve, water line, and fan prior to replacing anything so that you don’t end up wasting money on an otherwise unnecessary repair.
If these components aren’t at fault and your freezer’s temperature remains no less than 15 degrees Fahrenheit, then it’s possible that your replacement part has been damaged or malfunctioned due to any number of reasons resulting in the reason why you need to upgrade your ice-making system right away if this is going to work out for you.