Electrolux Dishwasher Not Draining

Electrolux Dishwasher Not Draining. Electrolux dishwashers don’t drain properly is one of the most common issues faced by homeowners. It can be quite scary to open up the door of the appliance and see standing water at the bottom.

However, never fear; this is not a plumbing emergency. In fact, you are likely able to fix this problem yourself without paying for professional services, if only you have the right information.

Electrolux Dishwasher Not Drainingwhy electrolux dishwasher not draining

In this article, we will discuss some problems with Electrolux dishwashers that don’t drain.

Belt For Water Pumps

The water pump belt might be worn out or broken. As there are few models that feature a water pump belt, it is advised to type in a search term of your model number to see.

If your model accepts a belt as its method of moving water over the dishes. To view the water pump belt, remove the lower control panel.

The water pump belt is held on with an exposed mount below the primary motor. If the dishwasher’s water pump belt has come off or seems worn, replace your old one with a new one at this time.

Issue With Drain Hose

The drain hose might need to be cleaned out. To clean out the drain hose, remove the hose from both the dishwasher and sink and clean it off using a bristled bottlebrush or a long-handled kitchen tool like one used for cleaning grills or can openers.

The clog is most likely at the branch leading into or coming out of your dishwasher; however, if your dishwashing machine has neither a garbage disposer nor an external pump then it’s more likely that clogs are found halfway down the hose itself, away from junctions.

Problem With Check Valve

In a dishwasher, the check valve prevents water from draining back into your water supply. This can happen when the valve gets stuck in the closed position.

To unclog a clogged valve, remove it from its housing and clear out any debris or food from within the valve.

After you clean it off, try reinserting it to see if that works. If not, simply replace the old check valve with a new one of equal size to repair your dishwasher.

Cause Of Check Ball

A check ball is meant to keep water from flowing back into the dishwasher once it has been drained through the opening where dirty water goes after the machine has run.

Some models might have something that looks like a small plastic ball, though in general a check valve could be installed without one for those models.

If this small plastic ball gets stuck, it can prevent water from draining through the valve, which is why you might want to try freeing it if you think that’s what might be wrong with your model of dishwasher.

Assembly Of Pumps And Motors

The motor of your dishwasher allows water to flow freely from the drain hose. If you notice the motor running during the priming cycle, be sure to check both your cutlery basket and your drain filter.

Now, if despite cleaning everything that goes into your dishwasher with boiling water, soaking it overnight in a mix of bleach and vinegar, and removing any other obstacles that may block it such as food debris.

There’s still an issue with your dishwasher which is leading to excessive noise when the motor operates, it could mean that the motor itself needs to be replaced.

Faulty Drain Pump

The drain pump in your dishwasher uses an impeller to force water through the drain hose. If the drain pump is not running, your dishwasher won’t drain.

To determine if the drain pump is faulty, check continuity on the pump’s motor with a multimeter; if no continuity exists or power is flowing but the system isn’t working, replace the potentially defective part with a new one.

Assuming your dishwasher’s drain pump operates at its normal capacity, take care to regularly clean out any food that might have gotten stuck inside it so as to prevent the accumulation of gunk which will eventually become a clog.

Defective Drain Valve

Over time, dirt and debris can build up on your drain valve. In order to make sure they continue to open and close properly, manufacturers recommend cleaning these valves even if they don’t appear clogged.

If the drain valve will not move even when the debris is gone, you’ll want to replace it before water damages the surrounding areas of your sink.

Your plumbing contractor will direct you as to whether or not a professional plumber should be called in to help remove and replace the drain valve.

Replace Or Clean The Filter

You may want to check your dishwasher filters if you are experiencing a problem draining. Cleaning the dishwasher filters on a regular basis is often overlooked by homeowners.

If you don’t know where the filter can be found on your dishwasher, consult the owner’s manual. Many dishwashers have their filter on the bottom of the appliance.

Related Guides

Leave a Comment