Electrolux Dishwasher Not Cleaning. Before spending time washing your dishes by hand, make sure it’s not because of an Electrolux dishwasher that won’t clean your dishes well.
Here are some troubleshooting tips for Electrolux dishwashers to help you figure out what might be going wrong if your dishwasher stops cleaning your dishes well.
If you’ve tried the best DIY fixes but fixing a bad-performing dishwasher is beyond your skill level, you could book a repair appointment with someone who specializes in appliances like Electrolux dishwashers instead.
Electrolux Dishwasher Not Cleaning
A dirty filter is the most common reason a dishwasher may not be able to clean dishes properly. The possible causes are a dirty filter, a clogged spray arm, and broken soap dispenser.
A recommended way of cleaning is to remove any food particles with a toothbrush, then rinse it underneath running water, ensuring the bristles are free of food.
If you’ve noticed that your dishwasher’s not getting dishes clean, it’s time to investigate using the guidelines below.
The following is a discussion of Electrolux dishwasher problems when it doesn’t clean.
Issue With Wash Impeller
The wash impeller is a tiny plastic blade attached to the motor’s impeller motor. It’s responsible for forcing water up through the wash arms.
If the impeller is broken or is missing some of its fins, it might not generate enough force to push water up through the arms.
On most models, you can replace the wash impeller independently of changing out the entire pump and control panel setup.
Just make sure to look up your model number first so that you can begin your replacement process with confidence.
Problem With Circulation Pump
The dishwasher’s circulation pump helps get water to the dishwasher’s spray arms by using a motor and impeller, which force water up through the arms.
If the circulation pump is defective, dishes won’t be cleaned properly.
However, if power is getting to the motor and the pump housing is free of debris, it may be necessary to replace the whole pump instead.
Replacing this part can be tricky as some people may need assistance from a professional appliance repair service because faulty pumps are not always easy to disassemble and then reassemble.
Belt For Water Pumps
The water pump belt might be worn or broken. However, this is something that commonly does not occur unless the dishwasher is running for too long of a period and the pump of the machine becomes saturated with water.
Few brands still use a water pump belt, but in order to check if your dishwasher has one, check if it has an access panel that you can shut.
Generally, the belt will be located around the motor on the bottom and if it needs to be replaced.
There are easy-to-follow steps on how to fix this, and a list of replacement parts required will be directed below these steps so that you might already have everything else needed.
Valve For Water Inlet
The water inlet valve opens to allow water to enter the dishwasher. If the valve is clogged or defective, it could allow access to too much or not enough water for the dishwasher to clean dishes properly.
In the event that your water inlet valve has been damaged, do not try to fix it yourself with any cleaners as this could only make things worse! Call us instead, and we’ll sort you right out.
Soap Dispenser Broken
If your dishwasher isn’t working properly, detergent might not be reaching your dishes.
Another common issue is that the door spring in the soap dispenser may be jammed.
To fix this, clean out the dispenser and remove any obstructions from the exit path of the spring mechanism.
If either of these is broken, then they need to be replaced.
A gasket around your soap dispenser may have come loose or become damaged, which would need to get replaced as well.
Make sure to check it periodically because cleaning a small dab of petroleum jelly around the interior of your washer’s soap compartment may help extend its life significantly.
Water With Low Temperature
Most dishwashers require water at very high temperatures in order to do their job properly. Set your water heater to 120 degrees Fahrenheit or above so that your machine can produce clean dishes.
Some dishwashers have a booster of sorts built into them, but if yours does not, make sure you run the kitchen faucet for 30 – 60 seconds before starting the dishwasher.
This will ensure that there is hot water coming from the machine in order to heat up the plates and cups.
Spray Arm Clogged
With a spray arm, the hot water gets sprayed from a large hole in the side of the main tub.
You may have one or more spray arms, depending on your model.
The jets inside can get clogged and reduce water pressure. Cleaning a spray arm might restore performance.
Depending on your model, the arm might be easy to remove with a simple snap-off clip, or you’ll need to unscrew it for access.
Scrub it with a soft brush and dish detergent, clear away obstructions with a toothpick and rinse under hot water.
Electrolux Dishwasher Not Cleaning
Interior Is Dirty
Things accumulate on the inside of your dishwasher. Grease, food bits, and deposits from hard water will eventually create a mineral deposit that can cause your dishes to come out dull or discolored.
A good first step when you notice things aren’t quite right with your dishwashing machine is to clean it thoroughly.
If buildup is minor, use vinegar in a cycle: pour 3 cups of vinegar into the bottom of your dishwasher, run through a full cycle, and then clean out the filter once more with vinegar to remove any soap scum or grease and food particles.
Related Guides