Echo Pole Pruner troubleshooting. The Echo Power Pruner is an electric pole saw manufactured by the company Echo. The Echo Power Pruner is intended for trimming and clearing high or difficult-to-reach areas, including hedges and tree branches.
Pole pruners are often advertised as a safe way to prune because many branches and topiaries can be reached by a long enough pole; as such, they eliminate the need to climb up on a ladder and balance while trying to prune.
However, after some time we face some problems in it’s working. But our some steps guide you on how to fix the problems.
Echo Pole Pruner Troubleshooting
The Echo Power Pruner is ideal for cutting and clearing high or difficult-to-reach areas of your garden with its long blade. But sometimes it can cause problems, so we are providing you with a troubleshooting guide.
In this guide, we provide you with some common issues and their solutions.
Echo Pole pruner won’t initiate
Inspect the spark plug for signs of wear or damage. If the porcelain insulator is cracked, an electrode is burned away or damaged, or there are heavy deposits of soot around the electrode, it may be time to change your spark plug.
You can test to see if your current spark plug is functioning as expected by comparing its functionality with a known good spark plug mounted in another pole pruner engine.
The recoil starter pulley helps take care of things. If you didn’t have a way to rewind the starter rope like the recoil starter pulley, then you wouldn’t be able to start your car when you were done using it for a day.
In that case, it would be about as good as a brick! So make sure you regularly inspect this important mechanism and replace it if need be.
If the recoil starter is required and not functioning, check to see if the recoil spring has snapped off. The function of this spring is to pull in the rope after being released by the starter.
This way, it will rest on the pulley when not in use. If this spring happens to be broken off, then there may be a minor issue with how it retracts.
If this is true, simply replace it with a similar mechanism or install an entirely new starter system so that you can enjoy creating those magical whirls once again.
Echo Pole pruner runs rough
The Carburetor may be clogged. A clogged carburetor is commonly caused by leaving fuel in the pole pruner for a long period of time. Over time, some ingredients in the fuel may evaporate, leaving behind a thicker substance that may begin to stick and cause issues for your engine.
If the carburetor is clogged, consider using a cleaning substance such as carb cleaner to clean out the excess buildup and do some more testing to see if this fixes your issue.
The fuel filter might be clogged. Make sure you wipe all lines with a clean, soft cloth to ensure there’s no dirt in the lines – if there is, it can rub against the nozzle tip and block off the flow of fuel.
Also, make sure you change your pruner’s fuel filter every few years, depending on how often you plan to use your pole pruner, if you don’t then small debris may accumulate slowly and plug up the tiny holes within the filter causing a foul smell and operation issues.
If the air filter is clogged, the engine will get too much fuel and not enough air. As a result, the engine may run roughly. If you are comfortable, it’s recommended that you replace it before anything else to avoid serious damage being done.
Echo Pole pruner engine stops after starts
The spark arrestor is a small screen that prevents the engine from emitting sparks. Over time, the spark arrestor can become clogged with soot.
If the spark arrestor is clogged, the engine may stall, so it needs to be cleaned periodically or replaced entirely as it gets too dirty.
To unclog your car’s spark arrestor, remove it and clean it out using a wire brush. If this doesn’t work then you might have to replace it entirely.
The carburetors may be clogged if the engine doesn’t start after it has stalled. This is most likely the result of leaving fuel in for an excessively long time and can easily occur when you forget to empty a gas can after filling up from a gas station.
Take care of this problem by cleaning out the carburetor with a special spray cleaner. If this does not resolve the issue, replace or rebuild the entire unit.
Echo Pole Pruner Troubleshooting
Related Guides