Dirt devil vacuum troubleshooting. Dirt Devil is one of the few companies that cater to the vacuuming needs of people. As a matter of fact, you can always count on Dirt Devil vacs to offer you a clean and hygienic house with a few moments of cleaning.
We’re hoping that your vacuum machine has never let you down, but in case it did, then this troubleshooting guide has everything you will ever need to get going again !
Refer to the guide to know how to assemble a dirt devil after your troubleshooting which will help you fix any type of problem-related issues regarding your dirt devil vacuum cleaners.
Dirt devil vacuum troubleshooting
Now, let us discuss problems related to dirt devil vacuum cleaners being used as well as what are some possible solutions for these problems.
Suction Failure
The air filter traps particles as the air flows through the vacuum cleaner, and if it becomes clogged, the suction will lessen.
If your vacuum filter is clogged and you don’t have the time for a deep clean, there may be an alternative to help improve your current vacuum’s performance: changing out its exhausted air filter with a new one!
It can be done quickly in just a few easy steps. The exhaust filter traps particles as the air flows through the vacuum cleaner and if it becomes clogged, the suction will lessen.
If your machine has its exhausted air filters replaced by means of dust bags or disposable dust bags, then you’ll want to make sure they are regularly maintained to keep them clean and usable!
Motor Doesn’t Work
To determine if the switch is defective, use a multimeter to test it for continuity. If the on-off switch does not have continuity, replace it. First of all, test the power switch for continuity to ensure that the motor is getting power.
If the power switch has continuity, ensure that the blower wheel turns freely and is clear of obstructions.
If power is getting to the motor, and the motor turns freely, but the motor still won’t run, replace the blower wheel assembly (Fan Motor).
Brush Not Turning
Has the brush roll come loose on your vacuum cleaner? If so, that can be the source of friction, and it can wear out the belt rather quickly.
Try not to run your vacuum with a brush roll that has been loosened. If you find that too much force is required to turn the brush roll, stop vacuuming immediately and check for any damage to the brush roll’s bearings.
Inspect the belt of your vacuum cleaner to see if it is broken, stretched out, or out of place. If your cogged belt is broken or stretched out, replace it.
Inspect the belt for any cracks or fraying – replace all belts if it shows signs of damage, even if they appear to be intact. Replace a worn belt immediately, and do not continue to use your vacuum cleaner until you have replaced both belts.
Belt Problems
A lot of customers complain that their vacuum cleaner belt keeps breaking every time they replace it. It might be because of the quality of the belt or due to some internal problems.
However, we have solutions that will make things easy for you and simplify how you go about addressing this problem.
But first, guests should check their vacuum belts – if you do not know how to select the best Dirt Devil vacuum belts, then it can interrupt the whole working of your vacuum cleaner.
Your vacuum cleaner’s brush roll runs the belt, and when a large amount of hair gets stuck inside it, the belt usually begins to get worn out and breaks.
When you put the brush roll in place, you are applying pressure on that area where the belt is stuck and the brush rolls turn.
Not picking up dirt
Some reasons for the vacuum not picking up dirt are clogged filters, blocked hoses, and other problems. Make sure to unplug the power cord before checking the below points. If it’s plugged in/turned on, you may have a clogged hose!
You can remove the vacuum hose from the machine and try dirt to check if it works okay. There are other ways to clean a hose – such as using a rubber brush cleaner.
If you’ve tested everything (including what you learn here) and your vacuum is still not up to par on suction quality or power, the main motor might be blown out, which will require repairs by professionals!