Danby Refrigerator Not Cooling. If you are having trouble getting your refrigerator to a safe working temperature, then this is probably not the problem.
The reason for this is that refrigerators won’t work properly without condenser coils cooling the inside of the appliance.
These coils can be located anywhere in or outside of the actual fridge, and their fan motor controls must be kept running correctly at all times to keep things cool in there.
To check if they are functioning correctly, first open up your fridge and locate the condenser fan motor either inside or outside.
Be sure to observe whether or not it has any obstructions blocking its blade-like dust or even simply old dirt.
Don’t assume it’s broken just yet, though, since these kinds of issues can be relatively easy to fix. If you see that none of those problems occur, then feel free to replace your condenser coil.
Danby Refrigerator Not Cooling
Danby Refrigerator Not Cooling. Danby Refrigerators have been known to have trouble with their condenser coils and fans.
The condenser coils are usually located beneath the refrigerator, and they’ll be in close contact with the motor that is running the compartments of your fridge.
Check if your condenser fan blade is free from obstructions or whether it’s even spinning before assuming that the motor’s bad.
The following is an explanation of some of the problems that can occur with a Danby Refrigerator when it isn’t cooling.
Error Starting Relay
The start relay is the first component to come into play when trying to turn the compressor on. The start winding in conjunction with this part must be completely operational in order for your refrigerator to operate as expected.
Here are a couple of reasons why you may have problems with your refrigerator and what you can do about it. If your fridge isn’t getting cold enough.
You’re 99% sure that the problem has something to do with the start winding, it’s best if you just buy yourself a new compressor because there’s no way or reason that should happen!
Fans For Condensers
The condenser fan motor is responsible for drawing air through the condenser coils and over the compressor.
If this fan motor isn’t working properly, your refrigerator won’t cool properly.
To determine if the fan motor is defective, first check to see if any obstructions are present on the condenser fan blade.
Next, try spinning the condenser fan blade by hand. If the blade doesn’t spin freely, you’ll need to replace the condenser fan motor.
However, if no obstructions are present and you’re able to spin it by hand, use a multimeter to test the condition of both the connections and surrounding resistors inside to see whether or not they’re in good working order.
Faulty Start Capacitor
The Start Capacitor provides a burst of power to start the Compressor. If the Start Capacitor isn’t working, the compressor may not turn on, and your fridge won’t cool.
So it’s important to know how to test a Start Capacitor for corrosion or damage and, if necessary, replace it by following these instructions for testing and replacing a Start Capacitor in an automatic defrosting refrigerator.
Thermistor Failure
A refrigerator uses a thermistor to monitor the temperature of its interior. Technicians can test the thermistor by touching it to one end of a voltmeter’s test probes, then applying a voltage to the other end.
The resistance between each probe should change as the technician increases and decreases the voltage.
If the thermistor does not show any change in measured resistance, has no continuity, or has an open circuit, replace it with a new one designed for your specific model’s configuration.
Malfunction Of The Compressor
The compressor is a pump that compresses the refrigerant and circulates the refrigerant through the evaporator and condenser coils. If the compressor no longer works, your refrigerator won’t be able to cool down very much.
It’s rare for this to happen as refrigerators are typically designed with several backup systems in case one part of the mechanism does not work correctly.
As long as all of your components are moving as they should when operating, you can start narrowing down which piece is causing your refrigerator issues by checking lines and circuits.
If you’ve determined that all of your other parts are working properly and find that there’s a fault within a component, like in this example, with the compressor pin circuit being open, then it may need to be replaced by a professionally assigned technician.
Dirty Condenser Coils
Condenser coils are usually located at the bottom of a refrigerator, but may also be found elsewhere in the appliance. They dissipate heat as they undergo corrosion.
If the condenser coils stay dirty, they don’t operate properly, which makes your refrigerator lack efficiency. Over time, foreign debris will accumulate and make them dirty if not cleaned periodically.
Vacuuming is usually enough to remove most of that debris, but if it’s significantly bothersome, open up your appliance and inspect for any objects or dirt on the coils as unwanted obstructions can cause issues like too weak cooling power.
Thermostat For Temperature Control
Temperature control thermostat maintains the temperature of your refrigerator by directing current to the compressor, evaporator fan, which cools down the refrigerant, and condenser fan, which removes heat from the condenser coils.
If it’s not functioning properly, you might get too hot or cold in the fridge when you open it. To check if the thermostat is faulty: turn it upwards or downwards and listen for a click (indicating release of voltage).
If the thermostat clicks it is most likely in working order; if not it should be tested with a multimeter, and if thermostats do not show any sign of power at all replace it.