Dacor refrigerator troubleshooting. Sometimes even the best appliances will need a helping hand to ensure they’re working as efficiently as possible.
The Dacor refrigerator is no different in this way – it requires regular maintenance to ensure it stays in great condition and works for a long time.
However, these handy Dacor fridge troubleshooting tips may help you fix any problems you encounter with your appliance.
Dacor refrigerator troubleshooting
If you’re looking for some help fixing your Dacor refrigerator, look no further. Our comprehensive Refrigerator Troubleshooting guide explains common issues, provides tips and shows you how to read error codes.
Dacor Refrigerator not cooling
The condenser fan motor draws air through the condenser section of your refrigerator. If the cooling is not working properly, it’s possible that the motor may be broken. First, check for obstructions on the blade of the motor itself.
Next, carefully inspect the motor with your finger to see if it’s oily or otherwise damaged. If there seems to be nothing wrong, test it using a multimeter when observing low temperatures in your fridge.
If you are still not getting adequate results, replace the compressor fan assembly as soon as possible.
An appliance thermostat is an automatic switch found in most refrigerators, freezers. Thermostats help regulate temperatures by controlling the amount of time that a motor turns on and off to keep temperatures below/above a set limit.
If a fridge thermostat isn’t working, it may cause the whole refrigerator to break down. To test and see if your thermostat is faulty, first, you’ll need to turn it a few times on the coldest setting possible.
If not, try the hot version; turn it all the way up until you hear/feel a click then back down a few millimeters. Also worth noting you can use an appliance tester kit to check if your thermostat needs replacing or re-calibrating.
Dacor Refrigerator water dispenser not working
Water is delivered to the water dispenser through an inlet valve. If the water dispenser does not have cold water even though the chilled water supply goes properly, check for a defective or broken-off Inlet Valve which requires at least 20 pounds per square inch ( psi ) to function properly.
If it meets this standard, test the valve with a continuity tester. If it comes out faulty or broken, replace the valve using a multimeter.
If one of the dispenser switches does not work, you can check if a replacement will solve the problem by using a multimeter to test each switch for continuity.
A dispenser switch will have continuity if it is working correctly. If a switch has no continuity, replace it with a new switch.
Dacor Refrigerator ice maker not working
Something might be wrong with an integral component of your fridge. The best way to tackle this issue is to replace the whole ice maker assembly as a single part is not available.
Check the water valve, water lines, and fan for any faults before buying a new part and if none are found and the freezer temperature is at least 15 degrees you’ll have to buy and install a whole new ice-maker unit.
Some refrigerators use an infrared beam to sense the level of ice in the ice bucket. When the ice level reaches the top of the bucket, it interrupts the infrared beam.
The control board then shuts off the ice maker. If there is no water flowing through to make bags of ice, this might be because there’s a blockage inside somewhere – try cleaning it out as best you can or call an expert.
Dacor Refrigerator ice dispenser not working
The dispenser switches deliver current to the dispenser, so any switch’s failure will stop the dispenser from pumping water out.
Use a multimeter to check that each switch is working correctly by measuring its resistance. Any defective switch should be replaced.
When the dispenser lever is pressed, the augers rotate and push ice toward the chute. If an auger is broken or is disconnected from the motor, it won’t be able to move the ice out of the machine effectively.
Check to make sure there isn’t any loose gear in one of these processes after checking with a technician on how to fix either issue if applicable.
If the gears of your ice crusher are jammed with ice, use warm water to melt the ice. If the gears in your ice crusher are broken or bent, replace them.
Dacor Refrigerator not defrosting
The defrost control board determines how often to run the defrost cycle in a refrigerator. If the board is defective, the refrigerator will not go into the defrost cycle to melt any frost buildup inside of it.
First test the defrost heater and defrost thermostat before replacing this part, because if either one of them is not working properly, it may seem like it’s due to the failure of the control board when the real issue is one of these components instead.
The defrost heater is on a timer to defrost the evaporator coils. If the defrost heater is defective, frost will continue to grow on the evaporator coils and the refrigerator will not work properly.
Test if the defrost heater has continuity with a multimeter. If it does not have continuity, replace it.
Dacor Refrigerator is noisy or loud
If the refrigerator is noisy or loud, open a freezer door and inspect the evaporator fan blade behind the back panel. First, turn it by hand to check if it’s in good condition.
If not, reinstall the existing one and see if that solves the issue. Next, check the condenser fan blade underneath the refrigerator’s back panel for any obstructions as well.
When an evaporator fan motor or a condenser fan motor fails in a refrigerator, these are the parts that make a lot of noises when the refrigerator door is open. If this happens, replace the failed parts.
Something might be stuck in the condenser fan or the motor bearings might need to be replaced. The condenser fan is usually found underneath your refrigerator near the back.
Turn your refrigerator so that you can access the back and then remove the access panel to inspect it.
Dacor refrigerator troubleshooting
Related Guides
