Crosley Dishwasher Won’t Start. A dishwasher that won’t start leaves you with a pile of dirty dishes and just as many questions. The reason your dishwasher won’t start won’t be apparent to those without experience with machines.
Pinpoint the most likely reason the appliance won’t power up, including simple solutions that may save you some money if the issue isn’t serious.
For example, a breaker in the circuit or blown a fuse can cause a dishwasher to stop working right away and will likely have an easy DIY fix.
Crosley Dishwasher Won’t Start
If a dishwasher doesn’t start, check to make sure there’s power reaching it and that its control panel is set to run on the proper cycle.
If the control panel is turned on and it receives power, but the dishwasher won’t start, then the thermal fuse may be blown. A multimeter test will tell if it has continuity when the fuse is reset.
Here we discuss some problems with the Crosley dishwasher when it won’t start.
Issue With Thermal Fuse
When the thermal fuse is functioning properly, it operates as a switch to cut the power supply. The thermal fuse will interrupt power flow in case of excessive heating.
A defective thermal fuse prevents the motor from running when the current level is too high and prompts the pump motor to overheat protection.
First, check the integrity of the electrical components, and check for open circuits; if no defects are detected, replace it with a new one
Defective Main Control Board
The main control board provides power to nearly every component of the dishwasher.
If there is a problem with the main control board, it might not send voltage to the dishwasher, causing the dishwasher not to start.
Control boards are often misdiagnosed. Make sure you check more commonly defective parts before replacing the main control board.
Examine The Door Latch
This dishwasher does not have a door latch engaged. When the door is not latched, the switch prevents the unit from starting and then causes an error code LCD to flash.
Check that the door is closed tightly, along with proper engagement of its lock. Is there any visible damage to either side of the dishwasher’s latch, such as worn, broken plastic, or something out of place?
If so, replace both sides of the latch first, and then check whether the Error code disappears.
Child Safety Lock Issue
Many dishwashers include a child lock feature. When engaged, this locks the dishwasher door to prevent kids from tampering with cycles or settings.
Typically, this will cause you to be unable to run your dishwasher and even exit the machine when locked.
To unlock your machine, if this seems to be occurring, refer to the user’s manual in order to cover what buttons you should press and for how many seconds, etc.
If your dishwasher will not run, but the door seems to be unlocked, try running it again.
Verify The Selector Switch
Selector switches on dishwashers allow you to choose from different washing, drying, and heating options for a wash cycle.
If defective or not depressed correctly, the selector switch could mean your machine won’t even startup.
Locate the selector switch on the control panel and make sure it’s not stuck between settings;
check to see if more than one button has been pushed if more than one is pressed, this will create a no-continuity situation for your switch, which means there will be no power to the controls.
Test The Selector Switch
If the dishwasher seems to be unresponsive, you’ll likely find that there’s a problem with the power supply. Make sure that the circuit breaker hasn’t tripped.
If it has, switch it off and then on again. Check your plug sockets by ensuring they aren’t loose in their sockets.
Check the circuitry board to make sure there aren’t any loose connections or defective components if you’re unfamiliar with this process, then perhaps it’s best to enlist a professional for help.
Defective Motor Start Relay
The motor start relay is what signals the dishwasher’s motor to start running. To find the relay, look inside the dishwasher near the pump and behind an access panel.
Remove your dishwasher’s motor start relay by loosening it with a screwdriver and then refer to your service manual for guidance on how to test or remove it.
Once you have tested your dishwasher’s motor starter relay with a multimeter, make sure that each terminal registers zero ohms when activated.
If not, your motor starter relay might be defective, so you must replace it as soon as possible because otherwise, it may get fried in a faulty fuse.
Timer Malfunction
A timer is an essential part of any dishwasher, and if it stops working in any way, the dishwasher won’t start properly.
The timer sends an electrical current to the right parts at the right times, which allows everything to function properly.
A faulty timer can sometimes cause the washer not to start, so before replacing that part, you should check other components that are known to frequently cause problems instead.
Crosley Dishwasher Won’t Start
Related Guides