Bosch ice maker not working. Common solutions for my Bosch Ice Maker are Not Working. If the freezer is too cold, the ice cubes might be forming but there not come out of your tube. Make sure the temperature is set between 3 and 5 degrees Celsius.
We recommend around 4 degrees Celsius. If the freezer temperature is above 10 degrees Fahrenheit (-12C), the ice maker will not produce ice cubes efficiently.
If the freezer temperature is too high, ensure that the condenser coils are clear of debris and that you’ve checked that the condenser fan behind your refrigerator is working properly by using your hands to check on its performance.
This should bring a feeling of air blowing against them if it’s indeed working properly.
Bosch ice maker not working
If you want to get your Bosch ice maker working again, you’ll need to look for the reason why it isn’t.
The issues that can be addressed by simply rebooting the machine include a rogue ice cube, a clog in one of the tubes, or a low-pressure point; but there are three other reasons that must be looked at more closely: frozen water filters, defective module ICE-100/ICM-100 modules or assembly units ICE-100G/ICM-100G needed replacement.
Temperatures setting
When the freezer temperature is below 5 degrees Fahrenheit (-15C), the ice maker will not produce ice cubes. The ideal temperature setting for the freezer is between 0 and 5 degrees Fahrenheit (-18 to -15C) if the freezer is too warm.
Check to see if the condenser coils are clear of debris and that the compressor continues to run while keeping everything in working order.
Additionally, make sure there isn’t frost on the evaporator coils (see photo). If frost has accumulated on your evaporator coils, it could mean you have a failed defrost system. If so, you may need to get parts or professional help from a local appliance repair company.
Faulty Assembly of Ice Makers
A component of the ice maker assembly might be defective. There is a possibility that this part is defective, so the ice maker may not function properly.
To figure out what the problem is, many modern refrigerators come with an auto shut-off feature in case of such problems.
The first step in troubleshooting is to check to see if the water line feeding into the icemaker valve or mechanism has frozen.
If there isn’t apparent freezing and your refrigerator generally stays at least 15 degrees Fahrenheit, there is likely something wrong with one of the parts of the ice maker assembly itself, and it would need to be replaced.
Defective Icemaker Module
With the help of a motor, the icemaker module cycles the ice ejector arms or turns a tray to eject the cubes into the ice bucket. At about 15 degrees Fahrenheit, the sensor or thermostat on the tray is activated.
It sends out a signal telling the module to cycle. At the end of the cycle, it sends power to the water inlet valve to refill it with water if your ice maker module is defective, it be by checking if your appliance has an on-off switch (the most likely culprit).
Figuring out whether or not there’s any clog in your icemaker’s blades (you will know when there’s something wrong if you hear strange noises while operating and if your ice is flopping around when you take it out).
Water Inlet valve problem
A water inlet valve opens electrically to supply water to the dispenser and ice maker. When the faucet isn’t turned on, water continues to flow. The problem is likely a faulty inlet valve, and you’ll need to replace it if it does not provide a continuous flow of water.
This light grey part receives its power from the faucet’s control system and doesn’t require any additional wiring. Use either an ohmmeter or multimeter to test for power at the Water Inlet Valve.
You will want to keep an eye on the temperature of your faucet during this process too as you may damage your equipment by turning it on improperly.
Door Switch fault
The refrigerator door has a sensor that shuts off the dispenser when it is open. If this door circuit fails, the ice and water dispensers will fail to operate.
To determine if the switch is at fault, use your multimeter to check for power on both prongs of the connector at the end of the door switch wiring.
If there’s no power on either one of those connectors, then it’s likely that you’ll need to replace it with a new part.
Dirty Water Filter
Clogged water filters can impact freshwater flow into the refrigerator, but they can also have an impact on the quality of the ice produced.
Filters should be replaced about every six months to ensure the best results in terms of how quickly ice will drop and how long a person could go without needing more since it’s important that plenty of ice is available at all times for parties and events.
Ice Level Control Board problem
Some fridges use infrared technology to sense what level the ice bucket is at in the stockpile. When it reaches this ceiling, the signal is broken, and the control board then switches off the ice maker.
When it dips below this height again, a signal is generated, and voila – back to more ice. If your fridge’s ice maker stops working, you may have a warped part, or there could be blockages on the motor, which are creating jamming issues.
So check to see whether your icemaker uses ice-level sensing and if so, check that you’ve power levels within a good range.
If all is well with the electronic board (this controls temperature and other properties) but your freezer still isn’t freezing enough food safely, it may be a warped section or blocked areas of your motor causing jams & breakdowns, for example.
The low water pressure issue
There may not be enough water pressure in the home. A water inlet valve supplies water to the ice and water dispensers.
The minimum pressure is 20 psi, and the rate of flow at which the pressure is delivered is to make sure that it has not dropped below 20 psi, causing the dispenser to malfunction.
Bosch ice maker not working
Related Guides
