Asko Washing Machine Troubleshooting

Asko Washing Machine Troubleshooting. Machines are one of the most frequently used household appliances because people need a way to clean their clothes and bedsheets on a frequent basis.

If they suddenly stop working or have problems, it would be incredibly disruptive because one may not have an easy backup plan in place to handle cleaning unless that person is fortunate enough to clean them by hand.

In this article, we will explain some of the most common washing machine problems so you’ll know how you can fix them if they come up without hiring a professional to do so for you.

Asko Washing Machine Troubleshooting

asko washing machine troubleshooting

In this article, we will discuss how to troubleshoot some Asko Washing machine problems.

Asko Washer Stops During A Cycle

The water inlet valve opens for water to enter the washtub during the wash cycle.

If the water inlet valve begins sticking and is not opening, it can cause delays in mid-cycle which will leave you waiting long periods of time while your clothes go through their cycle.

In order to avoid having this happen again, one should test the water inlet valve for continuity, or else just replace it.

In the case of an open lid, the lid switch assembly can prevent the washer from spinning. It does this by using sense switches on the front of the washing machine, which alerts the washer when it’s either supposed to be spinning or not.

If a sense switch isn’t working, then your laundry machine may stop mid-cycle. Begin by testing each of the sense switches with a multimeter to verify they’re operating as they should be. If they aren’t, replace them accordingly.

Asko Washer Will Not start

The line fuse will blow if the washer circuits are overloaded.

The washer won’t start if the line fuse blows. Make sure the fuse is not faulty by testing its continuity with a multimeter.

Replace it if there is no continuity. In addition, you need to investigate and resolve the problem behind the blown a fuse.

Inspect the drain pump, motor, or wires for shorted components. Your new fuse will also blow if the underlying issue isn’t addressed.

If the washing machine is overheating, thermal fuses are likely to be blown. If the fuse keeps blowing, it means there may be a problem with the washer, so you will need to check that out first.

It might be that debris has formed a clog, causing excess condensation in the hose – clear this with a toothbrush, and if that doesn’t fix it.

Check for other blockages in the washer as well, and resolve these issues one by one until you have found your solution.

If, after trying this, you still can’t get your resolution, then we advise seeking professional help from an appliance technician as soon as possible.

Asko Washer Will Not Drain

The coin trap is one of the most important parts of any washer. At first glance, it may not seem important, but in reality, it has a great deal of importance.

A washer will clog if coins are jammed as they enter its pots so you have to be careful when emptying them or handling your own wash in general.

If your washer jams, it may have a mechanism to prevent it, but if not, you’ll have to perform some maintenance.

Make sure you clean the coin trap monthly. You can easily tell whether there is a problem by checking the drains of your washers regularly and seeing whether they are working well, smelling bad, or malfunctioning.

Make sure the drain hose is not bent or kinked. Visually inspect to see if any obstructions are present in the drain hose.

If you find any problems with the drain hose, first try clearing them out then try replacing the drain hose if that doesn’t work.

Asko Washer Will Not Agitate

The washer transmission is connected to the motor by the motor coupling. In an overload situation, both the motor and transmission will be protected by this coupling.

This coupling can also fail due to normal wear and tear. Inspect the motor coupling to determine if it has been damaged by an overload or normal wear and tear. It should be replaced if it fails.

Under the lid, alongside the tub, is the motor control board. Power is sent to the motor by receiving commands from the electronic control board.

If you are having issues with your washing machine, check to see if you have a bad motor control board.

The easiest way to test out the system is to remove it to determine if your washing machine can actually run itself without your input every time you run a cycle.

Before doing anything else, replace the motor control board at once if it can be removed without any issues.

Asko Washer Will Not Spin

The drive pulley and motor rotate the washer drum with the help of the drive belt.

When you start your washing machine, wait a few minutes until you hear the sound/feel of the tub spinning if it’s locked up, then that usually means that one component or another is defective and has to be either replaced or fixed.

The best thing you can do here is turn off your machine immediately, then remove the access panel in order to inspect the parts inside.

In the middle of the outer tub is the bearing. By using this bearing, the inner tub spins smoothly.

If the tub bearing becomes worn you will have to replace it with a new one, but if this bearing isn’t sold separately, you might have to purchase a brand new outer tub and bearing altogether.

If purchasing a completely new unit for an assembly is too costly or troublesome for you, it would be best for you to opt for professional appliance repair services that can help fix your washer much more quickly instead.

Related Guides