Ariens Snowblower Won’t Start. If you’re not able to get your Ariens snowblower to work properly before the first snowfall of the year, there’s still time to get it in and have a local mechanic fix it up so that you can continue your beloved tradition of shoveling snow.
The reason is that if you happen to discover a problem with your unit ahead of time instead of on the day the first big storm hits, you can always go out and get some professional help without having to deal with competition at all.
Ariens Snowblower Won’t Start
If there is no spark, it’s important that you determine if the spark plug is defective or if there has been a malfunction with the electrical connection.
Failing to do so will result in wasted time and money. If we find that the snow blower’s carburetor is clogged, it, however, may require the removal of the entire carburetor for cleaning if you can’t remove any carburetor parts without professional tools and understanding of how each part works by cleaning off any built-up debris stuck inside first.
Here are some problems with Ariens snowblowers that aren’t starting.
Recoil Starter Problem
The recoil starter uses a spring-loaded cable that is pulled and released to start the engine. The recoil spring is what makes sure that the engine starts in one pull, even through thick mounds of snow.
If the recoil spring breaks, you will have to do multiple attempts just to turn the engine over. The best way to check whether your starter assembly needs replacing is by having it checked out before starting up on a big project that should only require one try.
But if you find yourself needing more than one attempt to get the Beast started on cold winter mornings don’t just push through.
Faulty Ignition Coil
A properly functioning ignition coil attaches to a spark plug and offers the welcome spark of electricity needed to ignite the gasoline in your engine while you drive.
If it’s not working properly, your snowblower may not start or might be unable to start with any consistency.
Again, we can ensure that the spark plug is firing appropriately before moving on to test your ignition coil.
A bad ignition coil should light up as soon as you test it according to instructions with a tester specialized for this purpose.
Flywheel Key Malfunction
The flywheel key might have snapped in half. The flywheel key is a small metal piece that fits into the crankshaft and engages with the flywheel to provide additional leverage when turning.
If the snowblower engine stalls suddenly or hits a hard object, this small but incredibly important piece of metal snaps to prevent damage to the engine or any attached components.
To determine if your flywheel key needs replacement, first use your big toe to push down on the pedal and turn on the ignition.
If pressing down on the pedal stalls the engine, then there’s a 99% chance your flywheel key has snapped and needs replacing.
Defective Carburetor
It could be something as simple as a blocked carburetor. A clogged carburetor is often caused by leaving fuel in the snowblower for a long period of time.
Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker substance that can clog up your carburetor and prevent it from working properly.
If this is the case, you need to either clean or replace/overhaul your entire carburetor, as you cannot be sure all of these issues are resolved with only one simple cleaning attempt.
Spark Plug Issue
Inspect the spark plug for signs of wear, cracks, or damage. If the porcelain insulator is cracked, an electrode has been burned away, and there is carbon buildup at the electrode.
If an electrode seems damaged, the spark plug should be replaced. To test whether a spark plug is faulty, you can use a spark plug tester.
The tester will go live when turned on when it’s linked up to a battery, showing that the one in question has received and conducted electricity from this source. If not, chances are it’s defective and shouldn’t be used.
Ariens Snowblower Won’t Start
Related Guides
