Amana Refrigerator Ice Maker Not Working

Amana Refrigerator Ice Maker Not Working. This is probably the most common issue that arises when an Amana Refrigerator ice maker stops working. When this happens, make a quick visual inspection of the collection drawer.

Note whether or not the release arm is doing its job properly stopping the flow of frozen goodies from getting to be too much of a hassle.

The release arm shouldn’t lock in place when it’s not supposed to, but occasionally it can get caught in between that position and needs a quick nudge from anyone who’s looking on to guide it back towards proper functionality/relaxation.

Amana Refrigerator Ice Maker Not Workingamana refrigerator ice maker not working

Amana Refrigerator Not Working. Make sure “Water” or “Ice” has been selected. Also make sure the water supply is properly connected to a cold water supply and the water shutoff valve is fully opened. Also make sure ice is not jammed in the ejector arm of the ice maker and that the clear dispenser chute is not clogged up by ice.

Module Issue With Icemaker

An icemaker module is equipped with a motor that turns the arm and/or trays to eject the cubes. Ice cubes are released when the motorcycle’s thermostat reaches about 15 degrees Fahrenheit.

The technician’s responsibility is to confirm that they’re already in place before rerouting more power to refill it with water at the end of the cycle.

First, make sure that your ice maker module is set to “on” rather than “off”; next, if your model permits, ensure that your bail arm.

The lever is positioned downward in order to prevent anything from obstructing production and finally if your brand allows, there are usually diagnostic points that a technician can utilize for further diagnosis.

Assembly Of Ice Makers

There may be a problem with one part of the ice maker assembly. You may have to replace the entire ice maker assembly if many of the ice maker parts are not sold individually.

However, check the water line and water inlet valve as well as a fan if available before replacing the ice maker assembly.

The ice maker assembly should be replaced if none of these parts is faulty and the freezer’s temperature is below 20 degrees Fahrenheit.

Valve For Water Inletvalve for water inlet

A water inlet valve opens electrically to provide water to the dispenser and ice maker. If this valve doesn’t receive sufficient pressure, it won’t let water flow through, so the ice maker won’t make ice.

This valve requires at least 20 psi of pressure to function properly.

Make sure that your home’s water supply has enough pressure by checking it with a water pressure gauge and address any issues you find until you can get the reading up to 20 psi.

If the requirement is met, check for power at the valve by using a multimeter and then replace it if none is received. For more results follow things like ice-maker troubleshooting.

Water Filter Problems

If a water filter gets clogged, not only will the ice maker suffer and not work properly, but it’ll restrict the flow of water to the dispenser and make that work abnormally.

Ultimately, this harms one’s ability to enjoy fresh filtered, clean water – so you definitely don’t want that. You should replace your water filter every six months or so to lower the chances of this happening and keep things flowing smoothly.

Malfunctioning Icemaker Switch

The ice maker switch is broken. Also, the icemaker switch was turned off by accident. Test whether or not the icemaker switch is turned on.

If it’s on but the machine isn’t dispensing ice, use a multimeter to check for continuity to see if there are any problems with the switch.

If you find that there is no continuity and you’re sure that the on/off switch has been thrown, it may be necessary to replace the icemaker switch with a new one and test again.

Thermostat For Icemakers

The icemaker mold thermostat is a device that measures the temperature of the ice mold. Once the temperature reaches a certain level, it causes the ice maker to eject its contents and refill the mold again.

If this sensor becomes faulty, it might prevent the ice maker from making cubes. To determine whether or not your sensor is faulty, use a multi-meter to check if it displays continuity.

To do this, touch one probe to each end of the thermostat using both hands by gripping it gently yet holding firmly – don’t leave any potential gaps between your fingers.

Faulty Door Switch

When the refrigerator door is open, the door switch turns off the ice and water dispenser. In the event of a malfunction, the dispenser will not turn on.

Using a multimeter, you can test continuity by holding the two probes between the cabinet’s terminals while opening and closing the door to activate it.

Amana Refrigerator Ice Maker Not Working

Related Guides

Leave a Comment