Amana gas stove igniter problems. Although some of the newer models can be a bit expensive, they offer a lot of new features. You will not only enjoy cooking more, but you will spend less time in the kitchen as well.
With their exceptional range of kitchen appliances, brands like Amana have dominated the market for many years. A good place to start is with this brand if you don’t know what good options look like.
Amana gas stove igniter problems
In this article, we will discuss some problems with Amana gas stove igniter problems and how to solve them.
Defective Spark Ignition Switch
A faulty spark ignition switch can inhibit the burner from producing a spark, which will mean that your range won’t be able to be ignited by using the self-cleaning cycle.
If you are unable to start your stove’s burners using the self-cleaning cycle and some other burner(s) is/are sparking properly, then it may be evidence of the malfunctioning part that needs to be replaced.
Faulty Spark Module
If a gas burner takes longer than a normal spark to light, or if the burner sparks intermittently and erratically, this could indicate that the spark module is at fault.
Make sure you check both the spark electrodes and the wire connected before deciding on what to do next.
If the electrodes and wires are in perfect condition, it’s likely that the spark module needs to be replaced.
Ignition switch and harness
When the burner is turned on, voltage is supplied to a module that produces a spark. If your range’s burners aren’t sparking, check first if other burners are sparking properly.
If they are, the problem could be related to the switch or the harness assembly. The best way to tell if the part is defective and may need replacing is to troubleshoot what it is doing when it should be sparking.
Replace Spark Electrode
The spark electrode is a specialized piece of the electric ignition system that creates an electrical spark in the burner assembly to ignite the gas and start the water heater.
If the sparks don’t ignite the gas, a clicking sound will occur as soon as electric power has been turned on.
This might be due to a weak spark or because one of your components is failing.
In this case, you should consider repairing or replacing either the electrode or other components that might be contributing to the problem; depending on individual circumstances.
Noise of clicking
If you’ve heard a clicking noise in your unit for a while and now the stove lights up but emits small explosion sounds before that, then you’re possibly dealing with an igniter issue. It’s best to replace the igniter to avoid any further complications.
Changing the heating element will have similar results, and replacing it is quite affordable.
Since that should solve the problem, it’s worth considering this option rather than going for other options like buying a new gas chamber.
One thing you should remember is if there are no problems with supplying fuel, then this issue will be fixed at this stage easily.
Hopefully, we’ve been able to better manage your concern about the clicking noise coming from your unit by providing this information.
The stove won’t light
The ignition system may have failed and the spark size isn’t large enough to ignite the gas inside the appliance.
The igniter may need to be replaced in this case. If you’re unable to handle this task on your own, hire a qualified mechanic or contact a repair service for help.
Related Guides