Amana Dishwasher Troubleshooting. Dishwashers are an excellent invention. If you have one that works right and without fail, then it’s a godsend because as we all know, cleaning dishes by hand can be tiring and time-consuming.
However, every great technology inevitably has its drawbacks and there are some things dishwashers aren’t good at dealing with, like washing the dishes in certain materials like ceramic or something more difficult to wash off in one sweep for example.
Luckily for us though, most of the most common problems can be assessed simply and repaired with ease on the part of a home appliance repair professional who will likely fix these issues within 24-48 hours after being called in if they have stock on hand.
Amana Dishwasher Troubleshooting
To troubleshoot Amana Dishwashers, we discuss some common problems.
Amana Dishwasher Will Not Latch
Inspect the door latch assembly for damage. You must replace it if there is a crack in the frame or if any of its components are broken.
The latch must also be replaced if any of the following parts are damaged. It is not repairable if it’s damaged, you must replace it.
The door strike assembly should be inspected for any damage, such as physical wear or breakage. If there is any other type of damage besides physical wear or breakage, it needs to be changed.
The door strike assembly cannot be repaired due to the fact that it cannot be fixed back into place once broken.
If broken in any way, then it must be replaced as soon as possible with the same model or upgraded if newer models are available.
Amana Dishwasher Will Not Start
Its control board provides power to nearly every component of the dishwasher. A common problem with control boards is that they won’t send voltage to the dishwasher and therefore it won’t start.
To make sure that you’re troubleshooting an issue with the correct part, you’ll want to perform a few tests before replacing other components on your dishwasher, specifically doing so with audio problems or ones related to power.
In the event that the dishwasher overheats, the thermal fuse will shut it off. When the thermal fuse blows, the dishwasher will not start.
To determine if the thermal fuse is out, use a multimeter to measure for continuity of the thermal fuse with other components that are part of your dishwasher system.
Once you’ve determined that it has blown, make sure to replace it with an exact replacement model to ensure safety and prevent any potential electrical fires or explosions.
Amana Dishwasher Will Not Fill
The float switch is designed to prevent the dishwasher from overflowing.
The float switch switches on when it detects that water levels are too high, thus stopping the dishwasher from functioning if that should happen.
If the dishwasher floods and causes a lot of damage due to a faulty float switch, then there is a chance you may not be held liable or responsible for fixing the problem and it becomes your insurance company’s problem instead.
Because of this risk, it’s wise to replace defective parts and ensure everything is in working order before using appliances again.
The water inlet valve is responsible for allowing water into the dishwasher. A clogged or stuck water valve will not allow water to flow into the dishwasher if it is stuck or clogged.
Typically, water inlet valves cannot be repaired, so if a problem occurs with the inlet, you will need to replace it.
Amana Dishwasher Will Not Drain
The drain valve may become clogged with debris over time. So the water can drain out smoothly, make sure the drain is clear of debris.
If the drain is clean, but it’s not working right, you may have to replace the drain valve.
Drain valves are meant to be replacement items; once they are no longer functioning properly, they should be replaced altogether with a new one at the earliest available time.
There is a drain pump at the bottom of most dishwashers that helps you drain the water properly.
A faulty or broken drain pump will not allow for proper drainage and can lead to several other issues that may cause to fill with water and overflow.
Test the motor of the drain pump using a multimeter to determine if it is malfunctioning. It is a drain pump that should be replaced if there is no continuity in the motor or if power is being provided, but it will not run.
You cannot repair an existing drain pump if it fails, it must be replaced by a professional and you should use our search bar on top to find an expert in your area who deals with this kind of appliance.
Amana Dishwasher Will Not Clean
A circulation pump is one of the basic components of a dishwasher. The pump circulates water throughout the dishwasher, ensuring that all parts of each dish are properly washed.
One reason why severe issues could occur during cleaning cycles is if the pump is damaged in some way. In this scenario, make sure you check the power at the outlet to ensure it’s working properly.
The defective circulation pump should be replaced if power to the motor is not an issue and no debris is visible in its housing.
Some homeowners may find this task challenging, but many have done so successfully. Before attempting such a task on your own, be sure you know what you’re doing.
Related Guides